Dual Gigabit Ethernet (LAN1 / LAN2) with PoE support: Test a camera while passing traffic to an NVR — diagnose bandwidth, packet loss and real-time network status without unplugging equipment.
Rapid ONVIF & IP Discovery / IP SCAN: Quickly find and connect to IP cameras (automatic discovery) to speed up setup and troubleshooting.
CVBS HD-ACT & multi-standard analog support (TVI/CVI/AHD/SDI): View and test both analog and HD-coax cameras in real time without manual switching — saves installation time.
HDMI Input & HDMI Output: Display camera feeds on external monitors or use monitor as input for recording and playback verification.
PoE Test (identify powered pins, voltage & polarity): Verify PoE switch output and detect faulty ports or wiring before replacing expensive cameras.
RJ45 Cable TDR (2–195 m): Measure cable length, attenuation and reflectivity to find shorts, opens or poor quality runs onsite.
Digital Cable Tracker (network / PoE / coax modes): Trace and locate specific cables in bundles and verify PoE pairs quickly with the remote probe.
Wi-Fi Analysis & Link Test: Check wireless signal strength and link quality for wireless cameras and AP placement.
Ping / DHCP / IP Tools: Full network troubleshooting toolkit to validate IP leases, connectivity and latency on the spot.
High-capacity battery (18650 ×6, 8–10h runtime): Full shift battery life for fieldwork — no constant AC dependency; safe battery protections included.
Rugged handheld design with touchscreen UI: Durable for onsite use; intuitive interface reduces training time for technicians.
Malaysia
