|
Specification
|
HUS4-A Screw Anchor
|
HUS4-AF Screw Anchor
|
|
|
|
|
|
Material, corrosion
|
Carbon steel, zinc-plated
|
Carbon steel, multilayer coating
|
|
Head configuration
|
Externally threaded
|
|
Approvals / test reports
|
ETA, Fire, Seismic
|
|
Base materials
|
Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked), Masonry (solid)
|
Concrete (aerated), Concrete (cracked), Concrete (hollow core), Concrete (uncracked)
|
|
Reusable (and removable)
|
Yes
|
|
Cleaning procedures
|
Automatic cleaning (SafeSet hollow drill bit), Manual cleaning, Non-cleaning
|
Manual cleaning, Non-cleaning
|
|
PROFIS software
|
Yes
|
|
Environmental conditions
|
Dry indoor
|
|
Material composition
|
Steel, zinc-plated (min. 5 µm)
|
Steel, multilayer coating
|
|
Applications
|
-
Temporary fastenings to concrete – such as traditional formwork, propping systems and protection barriers
-
Suitable for use in uncracked and cracked concrete, steel-fibre reinforced concrete, hollow core slabs (size 10-14), metal decks (size 10), low-strength concrete and masonry (size 10)
-
Assessed for use in a range of conditions: static, quasi-static, seismic (C1 & C2) and fire
-
Suitable for permanent fastenings in dry, indoor environments and temporary outdoor use
|
-
Fastening of baseplates – such as secondary steelwork, fences, handrails and racking systems
-
Suitable for use in uncracked and cracked concrete, steel-fibre reinforced concrete, hollow core slabs (size 10-14), metal decks (size 10) and masonry (size 10)
-
Assessed for use in a range of conditions: static, quasi-static, seismic (C1 & C2) and fire
-
Suitable for permanent fastenings in dry indoor environments and outdoor use
|
|
Advantages
|
-
Removable, adjustable (nominal embedment ≥ 60 mm) and reusable – ideal for temporary fastenings
-
Simpler to instal – less drilling, no cleaning, no high-accuracy torque wrench and no hammering required
-
Improved setting with less blocking – thanks to smaller core diameter and new thread design
-
External metric thread – for pre-installation or to fasten stand-off baseplates
-
Cost-saving design – pair with PROFIS Engineering software to optimise designs and reduce material costs
|
-
Removable and adjustable (nominal embedment ≥ 60 mm) – to help when levelling the baseplate
-
Simpler to instal – less drilling, no cleaning, no high-accuracy torque wrench and no hammering required
-
Improved setting with less blocking – thanks to smaller core diameter and new thread design
-
External metric thread – for pre-installation or to fasten stand-off baseplates
-
Cost-saving design – pair with PROFIS Engineering software to optimise designs and reduce material costs
|
Malaysia
