The Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (Corrosion Resisting) offers the same feature as the Active Cool Closed Cup Tester but comes with a corrosion resisting insert in the cup for testing corrosive samples.
It has been designed to carry out flash/no flash tests with a temperature range of 10°C to 130°C (50°F to 266°F) with no external cooling required. When connected to a suitable chilled water supply, the range is extended down to -20°C (-4°F).
There is also the Ramp Mode which increases the sample temperature at the rate of 2°C/min and automatically dips the ignitor every 1°C up to 100°C (every 2°C above 100°C), until either a flash is detected or the end of test temperature is reached.
| Part Number | Description | Certificate |
| K6910M022 | Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (Corrosion Resisting) |  |
| Temperature Range | -30°C to 135°C (-22°F to 275°F) | |
| Sample Size | 2ml (0.067fl oz) or 4ml (0.135fl oz) according to method | |
| Test Modes | Rapid Equilibrium and Ramp | |
| Test Duration Rapid Equilibrium Mode | 1 minute below 100°C (212°F), 2 minutes above 100°C (212°F), FAME 1 minute or user defined 1 to 99 minutes | |
| Test Duration Ramp Mode | Typically 7 minutes | |
| Cool Down Time | 80°C to 20°C (176°F to 68°F) in 4 minutes | |
| Cup Material | Corrosion Resistant Steel Insert, Aluminium Cup | |
| Dimensions | 300 x 340 x 380mm (11.8 x 13.4 x 15.0”) | |
| Weight | 8kg (17.6lb) | |
| Packing List | Elcometer 6910 Setaflash ‘Series 8’ Active-Cool (Corrosion Resisting), 2ml (0.067fl oz) syringe, flash detector, mains power cable, programming plug, 2mm Allen key, 2.5mm Allen key, certified flash point material (50ml/1.7fl oz), certificate of calibration, warranty registration form and operating instructions | |
Malaysia
