General information |
Product type designation |
PS 60 W 120/230 V AC/DC |
HW functional status |
from FS01 |
Firmware version |
from V1.0.0 |
Engineering with |
● STEP 7 TIA Portal configurable/integrated from version |
V12 / V12 |
● STEP 7 configurable/integrated from version |
V5.5 SP3 or higher |
Supply voltage |
Rated value (DC) |
120 V / 230 V |
permissible range, lower limit (DC) |
88 V |
permissible range, upper limit (DC) |
300 V |
Rated value (AC) |
120 V / 230 V |
permissible range, lower limit (AC) |
85 V |
permissible range, upper limit (AC) |
264 V |
Short-circuit protection |
Yes |
Line frequency |
● Rated value 50 Hz |
Yes |
● permissible range, lower limit |
47 Hz |
● permissible range, upper limit |
63 Hz |
Mains buffering |
● Mains/voltage failure stored energy time |
20 ms |
Input current |
Rated value at 120 V DC |
0.6 A |
Rated value at 230 V DC |
0.3 A |
Rated value at 120 V AC |
0.6 A |
Rated value at 230 V AC |
0.34 A |
Output current |
Short-circuit protection |
Yes |
Power |
Infeed power to the backplane bus |
60 W |
Power loss |
Power loss at nominal rating conditions |
12 W |
Interrupts/diagnostics/status information |
Status indicator |
Yes |
Potential separation |
primary/secondary |
Yes |
Isolation |
Isolation tested with |
2 500 V DC/2 s (routine test) |
EMC |
Interference immunity against voltage surge |
● Interference immunity on supply lines acc. to IEC 61000-4-5 |
Yes; ±1 kV (acc. to IEC 61000-4-5; 1995; surge symm.), ±2 kV (acc. to IEC 61000-4-5; 1995; surge asymm.), no external protective circuit required |
Degree and class of protection |
Equipment protection class |
I, with protective conductor |
Ambient conditions |
Ambient temperature during operation |
● min. |
-25 °C; up to FS04: 0 °C |
● max. |
60 °C |
Altitude during operation relating to sea level |
● Installation altitude above sea level, max. |
2 000 m |
Dimensions |
Width |
70 mm |
Height |
147 mm |
Depth |
129 mm |
Weights |
Weight, approx. |
600 g |