Super Jet Filter

Applications

Fast assembly

• SuperJet filters are factory-assembled as standard with a top part, filter body and bottom part, which can be quickly assembled and erected - or of course supplied separately. It is assembled using bolts in high tension steel with integrated washers, significantly reducing assembly time and the risk of over-tightening bolt assemblies.

• Galvanised sheet, class Z 275 - zinc plating min. 275 g/m² double-sided.

• The inlet is designed according to the "partial downflow" principle. Contaminated air is passed into the filter and hits a perforated plate which separates most of the dust particles, which settle downwards through the vertical square conduit. The air diffuses through the perforated plate and through the filter bags.

• PowerPulse® cleaning with ECO-PowerPulse® filter control system.

• The SuperJet filter is supplied with scraper bottom with discharge to a single B-500 rotary valve, but can be increased to two discharges, B-500 or B-750. Also available with discharge to JK-50S and JK-75S.

• The filter is fitted with approved explosion membranes. Choose between side venting or JKF’s specially developed VFV® explosion relief venting, which vents explosion pressure vertically through the filter top. The filters fulfil pressure shock-resistance according to EN 14460. Venting according to EN 14491.
• The filter is risk assessed in accordance with EN 1127-1 and CE-marked to have an internal zone 21 on the dirty side of the filter and zone 22 on the clean air side of the filter.

• Pressure: +/- 5000 Pa
• Filter area: 172 - 269 m²
• Max. operating temperature: 65ºC
• Min. operating temperature: -20ºC (available for -40ºC)

Connection

• 0.75 kW, 7.8 min-1, 3x400 V, 50 Hz, 2.7 A

• 24 VDC

• 0.3 kW, 3×400 V, 50 Hz, 1.1 A (16 A)

Dimensions