SIKA SIKAWALL SKIMCOAT FINISH (FINE WHITE/ FINISH GREY) # 192/SIMEN SKIMCOAT HALUS /SIMEN SKIM HALUS( 25KG)

DESCRIPTION

Formally known as Brefill Fine.

SikaWall-192 Finish is a one component cementitious fine finishing coat for skimming on wall and ceilings.

It's smooth finishing and good adhesion is suitable for internal application.

USES

SikaWall-192 Finish is a fast and economical way to patch fine surface imperfections such as pinholes and

hairline cracks.

CHARACTERISTICS / ADVANTAGES

Provide a good fine surface finish on walls, ceilings,etc.

Greater durability and flexibility

Quick drying and easy to apply

Thickness of the plaster can be varied to minimise wastage

Non-combustible

Non-cracking when applied at correct thickness and properly cured

Easy to mix just add water

Good adhesion

Can be applied by spraying

MIXING

SikaWall-192 Finish must be mixed with clean water at the site using a power drill whisk. Pour the required water into a suitable container then add SikaWall- 192 Finish while stirring continuously until a smooth consistency is achieved. Allow mixture to stand for a few minutes. Mix again and the plaster is ready for use.

APPLICATION

SikaWall-192 Finish is applied either by hand with a

steel trowel or spatula. The coat is then levelled off to

a smooth surface with a stee trowel. Ensure that the

applied coat has hardened before application of subsequent coats.

APPLICATION INSTRUCTIONS

SUBSTRATE QUALITY / PRE-TREATMENT

The substrate must be sound, clean, dry and free of all

contaminants e.g. dirt, oils, grease, coatings, surface

treatments, etc. If in doubt, apply a test area first. Dry

concrete, render or SikaWall surfaces must be

prewetted before application.