PRIMO 401 Tile Fix – High Performance Polymer-Modified Cement-Based Adhesive

PRIMO 401 Tile Fix is a superior quality polymer-modified cement-based adhesive formulated to meet the highest requirement for tile and stone fixing. It is suitable for both internal and external applications on concrete, brickwork, plaster, and screed surfaces.

Uses

Ideal for installing ceramic, homogeneous, marble, granite, and natural stone tiles
Suitable for walls and floors
Can be used in bathrooms, toilets, kitchens, balconies, open decks, swimming pools, ponds, and other wet areas
Excellent water-resistant properties

Advantages

Pre-mixed to ensure consistent quality
Pre-packed for convenient handling
Easy to mix and apply
Suitable for both wall and floor applications
Excellent bond strength and adhesion
Anti-sagging formulation
Non-toxic and eco-friendly formulation

Technical Data

Appearance	Grey Paste
Mixtures / Additives	Additives to improve workability
Water/Powder Ratio	8 to 9 litres of water per 40kg bag
Wet Density	1700 kg/m³
Tensile Adhesive Strength (28 Days)	1.0 N/mm²
Tensile Adhesion Strength After Water Immersion	≥0.5 N/mm²
Pot Life	1 hour after mixing with water
Coverage	Approximately 1.0 m² per kg (1mm thickness)
Open Time @20 Mins Classification	≥0.5 N/mm² (C1 - EN 12004 / MS ISO 13007-1)

Application & Usage

Surface Preparation: Remove all debris, loose mortar, dust, oil, and other foreign materials. Painted surfaces must be removed prior to the application of Primo Tile Adhesive.
Mixing: Mix 40kg of Primo Tile Adhesive with 8–9 litres of water. Mix thoroughly with an electric mixer or manually for about 5–6 minutes until a homogeneous paste is obtained.
Application: Spread the adhesive mixture with a notched trowel. After spreading, press tiles firmly into the adhesive bed and tap gently into position.
Packaging: Primo Tile Adhesive 401 is packed in 40kg bags.
Storage: Store in a dry place free from excessive moisture. Shelf life: 6 months in original packing.
Safety & Health: Non-hazardous. In case of eye contact, rinse immediately with plenty of water. If irritation persists, seek medical attention. Use protective gloves, mask, and eye protection. Read the latest SDS before use.
Cleaning of Tools: Clean all tools and equipment with water immediately after use. Ensure both the substrate and backs of tiles are clean before installation. Although homogeneous tiles do not need pre-soaking, always remove dust using a damp cloth or sponge.

* All technical data are based on laboratory tests. Actual data may vary due to circumstances beyond our control.

More detail about MP Sand Industries Sdn Bhd