Festo Pneumatic Guided Cylinder - 170874, 50mm Bore, 100mm Stroke, DFM Series, Double Acting

Technical Data

• Distance of centre of gravity of payload to yoke plate xs50 mm
• Stroke100 mm
• Piston diameter50 mm
• Drive unit operating modeYoke
• CushioningElastic cushioning rings/pads at both ends
• Mounting positionAny
• GuideSliding guide
• Structural designGuide
• Position sensingFor proximity sensor
• Symbol00991737
• Operating pressure0.1 MPa ... 1 MPa
• Operating pressure1 bar ... 10 bar
• Max. speed0.6 m/s
• Mode of operationDouble-acting
• Operating mediumCompressed air as per ISO 8573-1:2010 [7:4:4]
• Information on operating and pilot mediaOperation with oil lubrication possible (required for further use)
• Corrosion resistance class (CRC)1 - Low corrosion stress
• LABS (PWIS) conformityVDMA24364-B1/B2-L
• Cleanroom classClass 6 according to ISO 14644-1
• Ambient temperature-20 °C ... 80 °C
• Impact energy in the end positions1 J
• Max. force Fy1533 N
• Max. force Fy static1533 N
• Max. force Fz1533 N
• Max. force Fz static1533 N
• Max. torque Mx84.33 Nm
• Max. static moment Mx84.33 Nm
• Max. torque My54.43 Nm
• Max. static moment My54.43 Nm
• Max. torque Mz54.43 Nm
• Max. static moment Mz54.43 Nm
• Max. permissible torque load Mx as a function of the stroke13.89 Nm
• Max. payload as a function of the stroke at defined distance xs212 N
• Theoretical force at 6 bar, retracting1057 N
• Theoretical force at 6 bar, advancing1178 N
• Moving mass2870 g
• Product weight5511 g
• Alternative connectionsSee product drawing
• Pneumatic connectionG1/4
• Note on materialsRoHS-compliant
• Cover materialWrought aluminum alloy
• Seals materialNBR
• Housing materialWrought aluminum alloy
• Piston rod materialHigh-alloy stainless steel