LONG XING Oxygen Regulator GLX60018/ ACETYLENE REGULATOR GLX60019 regulator
ACETYLENE REGULATOR GLX60019 regulator
A Long Xing acetylene regulator is used to control the flow of acetylene gas in oxyacetylene welding and cutting. It reduces high pressure acetylene from the cylinder to a lower, usable pressure for the torch. The regulator should never be used with any other gas than acetylene
Purpose: To control the flow of acetylene gas in oxyacetylene welding and cutting.
Function: Reduces high cylinder pressure to a lower, usable pressure for the torch.
Safety: Acetylene regulators are designed specifically for acetylene and should not be used with other gases
GLX 60018 oxygen regulator
A Long Xing oxygen regulator is used to control and regulate the flow of oxygen from a cylinder to a cutting torch or other oxygen-consuming device. It reduces the high pressure of the oxygen in the cylinder to a safe and usable pressure for the application
1. Connecting to the Cylinder:
Ensure the oxygen cylinder is properly attached and that the valve is closed.
Attach the regulator to the cylinder valve, hand-tightening the connection.
Open the cylinder valve slowly to allow oxygen to flow into the regulator.
2. Setting the Pressure and Flow:
Use the regulator's pressure gauge to monitor the pressure within the system.
Adjust the flow rate as needed using the flow control knob or valve.
Some regulators may also have a flow meter to indicate the flow rate in liters per minute (LPM
