How to Use?
Clean surface free of grease, dirt and dust. For best results, roughen bond area prior to cleaning.
Cut off required amount. Replace disc on remaining portion. To mix, knead with fingers to uniform colour. If mixing is difficult, warm to room temperature. Wear gloves to avoid messing hands.
Apply to surface to be repaired (within 12 minutes of mixing) and work the material forcefully into the surface applying pressure until adhesion begins to take effect. Mould to shape if required. If material sticks to fingers, use the plastic wrapper to press the material in place.
For a smooth appearance, remove excess and hand rub with water or a damp cloth before hardening begins.
After 20-30 minutes, Knead It Underwater will harden and begin to form a strong bond. Allow for longer cure times at lower temperatures.
After 60 minutes, Knead It Underwater may be drilled, sanded, machined, filed, sawed or painted.
Wash hands thoroughly with soap and water after use.
Limitations:
Does not adhere to polyethylene, polypropylene or Teflon (polytetrafluoroethylene).
Set time increases at temperatures below 20°C.
Not recommended for filling joints/cracks subject to movement as the cured product is extremely hard and inflexible.
Do not use Knead It Underwater for applications in contact with drinking water.
