BOSTIK MAXIFLEX CEMENT GUM C2TE 25KG
Description
Maxiflex MY is improved cementitious adhesive with reduced slip and extended open time. It is a high strength
powdered adhesive for wall and floor applications. Suitable to use over concrete, cement render, screeds, fibrous cement sheeting and Bostik approved waterproof membranes. It is ideal for bonding most type of tiles, eg. monocottura, fully vitrified tile, natural stone, marble, granite, glass mosaic and reconstitutes stone, engineer stone, artificials stone and quartz.
CLASSIFICATION / STANDARDS
BS EN12004 CLASSIFICATION
C2 Improved cementitious adhesive (excellent bond)
T Adhesive with reduced slip
E Adhesive with extended open time
Key Features
– High strength powdered adhesive
– Can be used over Bostik approved waterproofing membrane
– Cost effective
– Environmentally friendly packaging
– Water washable
– No odour
– Convenient form
– Hydrates - chemically cures
– Excellent rheology & workability
– Easy to spread
SUITABLE SUBSTRATES
• Concrete
• Cement render
• Brickwork
• Blockwork
• Fibrous cement sheeting
• Bostik approved waterproofing membranes
Performance Properties
Typical properties conducted at 22°C and 50% RH
Appearance : Cementitious grey or white powder
Wet Density : approx. 1.55 g/cm3
Mixing Ratio : 25 kg powder into 6.0 to 6.5 litres of water
Pot Life : 2 hours
Tensile Strength : ≥ 1.0 MPa
After Immersion : ≥ 1.0 MPa
Heat Ageing : ≥ 1.0 MPa
Open Time at 30minutes : ≥ 0.5 MPa
Setting Time : 24 hours
Slip : ≤ 0.5 mm
Open Time : 30 minutes
LIMITATION
• Not suitable for tiling directly onto timber substrates.
• Not recommended for metal or plastic substrates.
GROUTING
Use appropriate Bostik tile grout. Allow joint widths of 1.5 mm to 6 mm for walls and 3 mm to 6 mm for floors as
per AS 3958.1-2007 clauses 5.4.6.
COVERAGE
25kg bag cover :
approx. 6.72m2, 3mm thickness
approx. 3.35m2, 6mm thickness
approx. 2.52m2, 8mm thickness
Malaysia
