To Machining 2Cr13 Drive Shaft As Sample Provided: Top Choice in Johor Bahru (JB), Johor. Boston Industrial Engineering Sdn Bhd

2Cr13 is a type of martensitic stainless steel, known for its combination of high hardness, moderate corrosion resistance, and good wear resistance. It is often used in applications where these properties are beneficial, such as in cutting tools, surgical instruments, and steam turbine blades.

Key characteristics of 2Cr13 stainless steel:

Good wear resistance:

The hardness and strength of 2Cr13 contribute to its ability to withstand wear and abrasion.

Magnetic:

2Cr13 is a martensitic stainless steel, meaning it is magnetic.

Weldable:

2Cr13 can be welded, but it's recommended to use proper techniques to avoid cracking.

Machinable:

2Cr13 is considered more machinable than other steels with similar properties, but it can still require appropriate tooling and techniques.

High hardness:

2Cr13 can be hardened through heat treatment, making it suitable for applications requiring a sharp edge or resistance to wear.
Moderate corrosion resistance:

While not as corrosion-resistant as some other stainless steels, 2Cr13 offers adequate protection against rust and corrosion in many environments.

Chemical composition:

The ''2Cr13'' designation indicates:

2: Represents approximately 0.2% carbon content.

Cr: Indicates the presence of chromium, which is a key element for corrosion resistance.

13: Indicates approximately 13% chromium content.

Common applications:

Cutting tools: Knives, scissors, and other cutting implements.

Surgical instruments: Scalpels, forceps, and other medical tools.

Steam turbine blades: Components in power generation systems.

Mechanical parts: Gears, shafts, and other components requiring strength and wear resistance.

Valves and pumps: Components in fluid handling systems.

Comparison with 3Cr13:

While both are martensitic stainless steels, 3Cr13 contains a higher carbon content (0.26-0.35%). This makes 3Cr13 slightly harder and more suitable for applications requiring a very sharp edge or high wear resistance. 2Cr13, with its lower carbon content, is often preferred for its better machinability and slightly higher corrosion resistance.

Service We Provide

To Machining 2Cr13 Drive Shaft As Sample Provided.

To Machining 2Cr13 Water Pump Drive Shaft As Sample Provided.

To Machining 2Cr13 Gear Reducer Drive Shaft As Sample Provided.

To Machining 2Cr13 Machine Drive Shaft As Sample Provided.
To Machining 2Cr13 Converyor Drive Shaft As Sample Provided.