Description
Use
Material
Features
- Easy and accurate to measure depth and length of undercut
- Dial gauge type performs more precise measurement
- Three point support for stable measurement
Specifications
- Measuring Range： 0～4.00mm
- Minimum reading： 0.01mm
- Accuracy： ±0.04mm
- Width of measurement base: "R 23mm
Weight: 280g
Dimensions ( Unit: mm)
Zero Adjustment
Recommended to be performed on a flat surface such as a surface plate
(1) Loosen GAUGE PROBE RETAINER SCREW using hex key
(2) Place Welding Gauge on surface insuring all three points of
MEASUREMENT BASE are making contact (2x ADJ, 1× FIXED) and push on SPINDLE shaft. When 1mm POINTER indicates 4.00mm, tighten GAUGE PROBE RETAINER SCREW. (Insure that probe tips in contact with we surface plate)
Measurement
1 Place the gauge on a flat surface and rotate BEZEL to indicate 0.01 mm. (Figure 1)
(2) Place PROBE tip on weld undercut point to be measured. (Figure 2)
(3) Undercut value is obtained by subtracting Dial Gauge reading from 4.00mm
More detail about KSJ Global Sdn Bhd
Malaysia
