| Applicable fluid | (Pneumatic type) Air, Non-corrosive gas |
|---|---|
| Pressure port direction | Rear fitting |
| Pressure port | R1/8 |
| Connection type | Connector type(connector type cable: 2m) |
| Pressure type | Compound pressure |
| Rated pressure range | -101.3 to 100.0kPa |
| Display pressure unit | kPa, kgf/cm², bar, psi, mmHg, inHg, mmH₂O |
| Control output_PNP open collector | PNP open collector |
| Option input/output | Hold/Auto shift input |
| Power supply |
12-24VDC  ±10%(ripple P-P: max. 10%) |
| Current consumption |
Voltage output type: Max. 50mA Current output type: Max. 75mA |
| Protection structure | IP40 |
| Control output_Hysteresis | Min. display interval |
| Control output_Repeat error | ±0.2% F.S. ±Min. display interval |
| Control output_Response time | Selectable 2.5ms, 5ms, 100ms, 500ms, 1000ms |
| Environment_Ambient temperature | -10 to 50℃, storage: -20 to 60℃ |
| Environment_Ambient humidity | 30 to 80% RH, storage: 30 to 80% RH |
| Material | Front, Rear case: Polycarbonate, Pressure port: Nickel Plated Brass |
| Weight | Approx. 165g(approx. 80g) |
※In hysteresis output mode, detection difference is variable.
※It is allowed to select one analog output type only.
※The weight includes packaging. The weight in parenthesis is for unit only.
※F.S: Rated pressure.
※There may be ±1-digit error in hysteresis by pressure unit calculation error.
※The temperature or humidity mentioned in Environment indicates a non freezing or condensation.
