Functions of Viper Condenser Cleaner:
1. Cleans Outdoor Coil (Condenser Coil)
• The condenser coil in the outdoor unit is often exposed to dust, leaves, oil, soil, and heavy dirt.
• Viper Condenser Cleaner is formulated to remove tough dirt stuck on the aluminum fins of the condenser.
.;
2. Restores Airflow & Cooling Efficiency
• A clean coil helps release heat more effectively.
• When the condenser is clean:
• The compressor runs cooler
• The air conditioner cools faster
• Saves electricity due to reduced load
.;
3. Heavy-Duty Formula
• Viper Condenser Cleaner uses a heavy-duty alkaline formula, stronger than indoor cleaners.
• Effectively dissolves oil and thick dirt, yet safe for aluminum.
.;
4. Anti-Corrosion Protection (depending on type)
• Some variants contain anti-corrosion additives, helping extend the outdoor coil’s lifespan.
.;
5. Suitable for Professional & DIY Use
• Commonly used by technicians, but can also be applied by homeowners familiar with handling outdoor units.
.;
Quick Usage Guide:
1. Turn off the air conditioner power (safety first).
2. Spray Viper Condenser Cleaner evenly onto the outdoor coil.
3. Wait 5–10 minutes to let the dirt loosen.
4. Rinse with clean water, e.g., using a medium-pressure hose.
5. Allow to dry before turning the air conditioner back on.
.;
Important:
• Do not use Condenser Cleaner on the Evaporator (indoor unit) – it is too strong and may damage internal components.
• Wear gloves & a mask, especially if there is wind or when used in enclosed areas.
