Description
Transformers breathe during the thermal contraction of the oil inside the transformer. Control that no humidity enters inside the transformer during this operation because moisture causes aging and outages. Choose our dehydrating breathers and assure moisture absorption through colored silica gel, which indicates the silica gel saturation. The operator identifies on-site when to replace the silica gel with new salt.
Features
- Proven technology
- Large installed base
- Easy installation and easy maintenance on site
Application
- Oil-filled transformers with conservator
- On-load tap-changers
- Suitable for new installations and retrofits
Technical data at a glance
- Standard: IEC60076-22-7
- Material: All the external parts are resistant to transformer oils, salt fog and UV rays
- Type of installation environment:
Indoor / Outdoor:Corrosion class: C4-Medium RAL 7032
Tropical proof: Corrosion class: C5-Medium Geomet coatings
- Protection pipe material: Glass or Polycarbonate
- Ambient temperature: From -40°C to 80°C (from -40°F to 176°F)
- Connection: Available with EN flange or with female thread
- Additional bracket for the lower part: Only for types 7 and 8
- Desiccant: Colored, non-poisonous silica gel; the color changes from orange to green when absorbing humidity.
- Protection: Stainless steel pipe protection against accidental blows; the opening allows visual inspection of the silica gel on site
- Pressure load loss of air through the dehydrating breather: 0,003 kg/cm2 for in-let air; 0,005 kg/cm2 for out-let air
* Available for the standard version
** The oil quantities assigned to size classes are oriented on normal European ambient conditions as given in EN50216-1, Table 1.
The values are intended to give guidance to the user: The proposed choice must take into consideration the real environmental conditions,
the thermal cycles due to the service conditions of the transformer and the maintenance cycle.
More detail about ALLIANCE SUPPLIES SDN BHD
Malaysia
