Comply to EN1492-1:2000+ A1:2008* 2. Available Safety factor 6:1 and 7:1 3. 1ply to 4ply up to 64tons
Contact us for custom size / length / design of webbing sling and round sling
Third party load test certification service available upon request
Low elongation
100% high tenacity polyester
Always
Store and handle webbing slings correctly.
Inspect webbing slings and accessories before use and before placing into storage.
Follow safe slinging practices, as given overleaf.
Position the bight for choke lift at 120° (natural angle).
Position the sling so that the load is uniformly spread over its width and protect the sling from sharp edges. Apply the correct mode factor for the slinging arrangement.
Never
Attempt to shorten, knot or tie webbing slings.
Expose webbing slings to direct heat or flames.
Use webbing slings at temperatures above 80°C or below 0°C without consulting the supplier.
Expose webbing slings to chemicals without consulting the supplier.
Shock load webbing slings.
Use webbing slings which are cut or which have loose or damaged stitching.
Use a sling with a missing/damaged label or illegible markings
More detail about Q LIFT INDUSTRIAL SDN. BHD.
Malaysia
