GXA-S NC ROTARY TABLE (MULTI-POWER PNEUMATIC CLAMP): Top Choice in Malaysia, Johor Bahru (JB), Selangor, Penang, Kuala Lumpur (KL) IPM TECHNOLOGY SDN BHD

Description

About GXA-S NC ROTARY TABLE

Feature :

Worktable diameter Ø125,Ø170,Ø210,Ø255.
Exclusive patented dual pneumatic piston braking system.
Higher rotation speed.
Equipped with high precision cross roller.
Full gear depth transmitted by dual lead worm drive, resulting in higher efficiency and lower backlash.

MODEL SPECIFICATIONS		UNIT	GXA-125S	GXA-170S	GXA-210S/GVA-210SL	GXA-250S
Worktable Bore Diameter		mm/inc	170	210	255	320
Center Bore Diameter		mm/inc	40	40	140	180
Through Bore Diameter		mm/inc	40	40	90	140
Height Of Table (Horizontal)		mm/inc	160	160	190	210
Height Of Center (Vertical)		mm/inc
Width of T-Slot		mm/inc	0.6-0.7 Pne	0.6-0.7 Pne	5 Hyd	5 Hyd
Width Of Guide Block		mm/inc	420	420	900	1600
Clamping Method /Pressure		Mpa/psi	Pneumatic	Pneumatic	Pneumatic	Pneumatic
			0.55~0.7/	0.55~0.7/	0.55~0.7/	0.55~0.7/
			79.8-101.5	79.8-101.5	79.8-101.5	79.8-101.5
Clamping Torque		Nm/ft.lbs.	140/103.18	300/221.1	400/294.8	400/294.8
Transmission Ratio			1/40	1/60	1/72	1/72
Max. Table Speed		min-1	66.6	53.3	53.3	53.3
Standard Loading Inertia		Kg.m2	0.2	0.72	1.38	1.38
Maximum Loading Inertia		Kg.m2	1	3	5	5
Resolution		deg	0.001	0.001	0.001	0.001
Indexing Accuracy		sec.	40	20	20	20
Repeatability		sec.	6	6	6	6
Net Weight (Servo Motor Excluded)		kg/lb	32/70.40	52/114.4	60/132	67/147.4
Allowable Loading Capacity	Vertical	kg/lb	50/110	100/220	125/275	125/275
	Horizontal	kg/lb	100/220	200/440	250/550	250/550
	Tailstock Applied	kg/lb	100/220	200/440	250/550	250/550
Allowable Load (When Table Clamped)		N/lbs	9700/2176.68	14000/3141.6	17000/3814.8	17000/3814.8
		Nm/ft.lbs.	410/302.17	1020/751.74	1265/932	1265/932
		Nm/ft.lbs.	140/103.8	300/221.1	400/294.8	400/294.8
Allowable Cutting Torque		Nm/ft.lbs.	85/62.65	200/147.41	260/191.62	260/191.62