| ModelID | NPM-D3 |
| Front head | Lightweight 16-nozzle head / 12-nozzle head / 8-nozzle head / 2-nozzle head |
| Rear head | Lightweight 16-nozzle head / 12-nozzle head / 8-nozzle head / 2-nozzle head |
| PCB dimensions | Dua-lane mode: L50 mm x W 50m-L510 mm x W 300 mm Single-lane mode: L50 mm x W 50m-L510 mm x W 590 mm |
| Electric source | 3-phase AC 200.220,380.400,420.480 V 27 kVA |
| Pneumatic source | 0.5 MPa、100 L /min (A.N.R.) |
| Dimensions | W 832 mx D2652 m xH1444 m |
| Mass | 1 680 kg (Only for main body:This differs depending on the option configuration.) |
| Placement head |
16-nozzle head
(Dual Heads）
|
16-nozzle head
(Dual Heads）
|
12-nozzle head
(Dual Heads）
|
8-nozzle head
(Dual Heads）
|
2-nozzle head
(Dual Heads）
|
| Placement speed | 84 000 cph(0.043 s/chip) High production mode[ON] | 76 000 cph(0.043 s/chip) High production mode[OFF] | 69 000 cph(0.052 s/chip) | 43 000 cph(0.084 s/chip) | 11 000 cph(0.327 s/ chip) |
| Placement accuracy(Cpk≥1) | ±40 um /chip | ±30 um / chip (±25 um / chip) |
±30 um / chip | ±30 um/ chip ±30 Um/QFP 口12 m ~ 032m ±50 um/QFP 口12 m Under |
土30 um/QFP |
| Component dimensions | (01005)0402 chip to L6xW6xT3 | 03015/(01005)0402 chip to L6xW6xT3 | (01005)0402 chip to L12xW12xT6.5 | (01005)0402 chip to L32xW32xT612 | (0201)0603 chip to L100xW90xT28 |
| Tape feeder | Tape:8 / 12 / 16 / 24 / 32 / 44 / 56mm | Tape:8 / 12 / 16 / 24 / 32 / 44 / 56mm | Tape:8 / 12 / 16 / 24 / 32 / 44 / 56mm | Tape:8 / 12 / 16 / 24 / 32 / 44 / 56mm | Tape:8 to 56/ 72/88/104mm |
| Stick,Tray | - | - | - | Stick:Max8 Tray :Max, 20 (per tray feeder) | Stick:Max8 Tray :Max, 20 (per tray feeder) |
Malaysia
