Radial Lead Component Insertion Machine RG131 NM-EJR3A NM-EJR4A

THT Machine RG131 NM-EJR3A NM-EJR4A

Higher insertion speed and operation efficiency improve productivity

• Either one of 2-pitch, 3-pitch or 4-pitch specification can be selected for insertion pitch.
• High speed insertion of 0.25 to 0.6 sec. even for large-size components.
• The use of guide pins makes high-density insertion possible when there is a gap between components.

  Model No.	NM-EJR3A	NM-EJR4A
  PCB dimensions	L 50 mm x W 50 mm to L 508 mm x W 381 mm	L 50 mm x W 50 mm to L 508 mm x W 381 mm
  Max.speed*1	0.25 s/component to 0.6 s/component	0.25 s/component to 0.6 s/component
  No.of component inputs	40	80
  Applicable components	Pitch 2.5 mm, 5.0 mm, 75 mm, 10.0 mmHeight Hn=Max.26 mm Diameter D=Max.18 mmResistor, Electrolytic capacitor, Ceramic capacitor,LED, Transistor, Filter, Resistor network	Pitch 2.5 mm, 5.0 mm, 75 mm, 10.0 mmHeight Hn=Max.26 mm Diameter D=Max.18 mmResistor, Electrolytic capacitor, Ceramic capacitor,LED, Transistor, Filter, Resistor network
  PCB exchange time	about 2 s to about 4 s (Room temperature 20°C)	about 2 s to about 4 s (Room temperature 20°C)
  Insertion direction	4 directions (0, 90, -90 , 180)	4 directions (0, 90, -90 , 180)
  Electric source*	3-phase AC 200 V,3.5 kVA	3-phase AC 200 V,3.5 kVA
  Pneumatic source	0.5 MPa, 80 L/min(A.N.R.)	0.5 MPa, 80 L/min(A.N.R.)
  Dimensions	W 3 200 mm x D 2417 mm x H 1 620 mm "3	W 3 200 mm x D 2417 mm x H 1 620 mm "3
  Mass	2 250 kg	2 350 kg