NAD HTR-10 Learning Remote Control

Description:

The NAD HTR 8 is ready to operate NAD components right out of the box, but it is really eight remotes in one. Each of the 8 device selector keys at the top of the handset can call up a new “page” of remote control codes to be transmitted by the remaining keys. You may “teach” codes from any infrared-remote controlled component, regardless of brand, to any or all of these. Obviously, the most logical system is that you teach the codes from your DVD player to the [DVD] device selector “page,” your television’s codes to the [TV ] “page” and so on, but there is no required scheme: You may load any commands to any key on any page.

The HTR 8 is already pre-programmed with a full complement of NAD receiver commands on its [AMP] device selector page, and as well as with library commands to operate most NAD-brand DVD, BD, CD or TUNER components on the corresponding device selector “pages”. These default commands are permanent: Even if you teach the HTR 8 new commands to take their place, the underlying library commands remain in place and can easily be recalled should you add an NAD component to your system later.

HTR 8 can learn up to 360 commands .

Features:

Controls up to 8 devices 

• Preprogrammed with all NAD Remote Commands
• Learning Function : Learns up to 352 Commands 
• Punch Through Operations Permit Easy Access to Commonly Used Functions 
• Motion Sensing Backlight (with adjustable timeout) 
• USB for Upgrades