| MODEL | Unit | FMH-630 | |
| TRAVEL | No.50 | ||
| X-Axis Travel | mm | 1,000 | |
| Y-Axis Travel | mm | 850 | |
| Z-Axis Travel | mm | 850 | |
| Spindle Center To Table Surface | mm | 50~900 | |
| Spindle Nose To Table Center | mm | 200~1,050 | |
| Table Surface To Floor | mm | 1,300 | |
| TABLE | |||
| Table Dimensions | mm | 630x630 | |
| Max.Loading Weight | kg | 1,200 | |
| Screw Specifications | - | M16xP2 | |
| Min.Indexing Degree | degree | 1°/(opt:0.001°) | |
| SPINDLE | |||
| Spindle Speed | rpm | 6,000/8,000 (opt) | |
| Spindle Nose Taper | - | 7/24 taper NO.50 | |
| Dia.of Spindle | mm | Ø100 | |
| Spindle Motor | Kw | (BELT) 11/18.5 | |
| FEEDRATE | |||
| X Axis Rapid Traverse | m/min | 42 (48) | |
| Y Axis Rapid Traverse | m/min | 42 (48) | |
| Z Axis Rapid Traverse | m/min | 42 (48) | |
| Cutting Feedrate | m/min | 15 (20) | |
| AUTOMATIC TOOL CHANGER | |||
| No.of Tools | - | 40:60/90 (opt) | |
| Pull Stud (degree) | - | P50T-1 | |
| Max.Tool Weight | kg | 20 | |
| Max.Tool Length | mm | 500 | |
| Max.Tool Diameter | mm | Ø125 | |
| Max.Tool Diameter (No Adjacent Tool) | mm | Ø220 | |
| Tool Changing Time (Tool To Tool) | sec/Hz | 8/60 | |
| Number of Pallets | - | 2 | |
| Method of Pallet Change | - | ROTARY | |
| Pallet Change Time | sec/Hz | 10/60 | |
| Floor Space | mm | 4,130/6,624 | |
| Machine Weight (net) | kg | 19,000 | |
| Max.Machine Height | mm | 3,661 | |
| Power Capacity | KVA | 65 | |
| Air Source | bar | 6~8 (85psi) | |
Malaysia
