TSURUGA MODEL 3153B

DC Voltmeter/ Ammeter

• ■ 45 mm character size clear bright large LED display.
• ■ Equipped with scaling function.
• ■ Available with average calculation, display hold, peak/bottom display function.
• ■ AC power supply 100 to 240 V.
•  
• Model Designation

• 3153B	-	□	-	A	-	□
  		①		②		③

  ①Measuring Input

  Code	Measuring Range	Input Resistance	Accuracy *	Overload
  02	±99.99 mV	100 MΩ	±(0.05% of rdg + 1 digit)	DC ±250 V
  03	±999.9 mV	10 MΩ	±(0.05% of rdg + 1 digit)	DC ±250 V
  04	±9.999 V	10 MΩ	±(0.1% of rdg + 1 digit)	DC ±250 V
  05	±99.99 V	10 MΩ	±(0.1% of rdg + 1 digit)	DC ±500 V
  09	1 to 5 V	1 MΩ	±(0.1% of rdg + 1 digit)	DC ±250 V
  13	±999.9 µA	100 Ω	±(0.1% of rdg + 1 digit)	DC ±50 mA
  14	±9.999 mA	10 Ω	±(0.1% of rdg + 1 digit)	DC ±150 mA
  15	±99.99 mA	1 Ω	±(0.1% of rdg + 1 digit)	DC ±500 mA
  16	±999.9 mA	0.1 Ω	±(0.1% of rdg + 1 digit）	DC ±2 A
  19	4 to 20 mA	12.5 Ω	±(0.1% of rdg + 1 digit）	DC ±150 mA

     * Accuracy:

  Defined in the condition of 23 ± 5°C, 45 to75% RH.

       Temperature coefficient:

  ±150 ppm/°C, (operating temp. range: 0 to 50°C.

  ② Power Supply

  Code	Power Source Voltage
  A	AC 100 to 240 V

  ③Display Color

  Code	Description
  R	Red LED
  G	Green LED

  General Specifications

  Display	Red or green LED, character height 45 mm, with zero-suppress function.
  Display scaling	Full scale display: -9999 to 9999 Offset display: -9999 to 9999
  Offset fixing function	The display for the value less than the offset value can be set to display the offset value.
  Decimal point	Arbitrarily settable from the terminal blocks
  Over-range display	When exceeded 100% or 130%, indicated with  When exceeded -100% or -130%, indicated with .
  Display cycle	67ms, 400ms, 1s, 2s, 3s, 4s, 5s Selection of setting available
  Average calculation	Divisional averaging or moving average, and the numbers of samples for averaging can be selected. OFF: No moving averaging ON: Divisional averaging Numbers of sample for averaging, 2, 4, 8, 16, 32
  Hold function	Holds measurement data (No isolation and measurement input)
  Peak / Bottom change-over	Function of the terminal block P/B can be changed to maximum or minimum value display.
  100 digit turn out	The display of 100 digit is compulsorily turn out.
  Power supply	AC 100 to 240 V, 50/60 Hz
  Tolerance of source voltage	AC 90 to 250 V
  Power consumption	AC 100 V … Approx. 4 VA AC 200 V … Approx. 5 VA
  Operating temperature	0 to 50°C
  Operating humidity	35 to 85% RH　（No condensation）
  Storage temperature	-20 to 70°C
  Insulation resistance	DC 500 V　 More than 50 MΩ
  Withstand voltage	Between input terminal and external case: AC 1500 V for 1min. Between power supply terminals and external case: AC 1500 V for 1min. Between power supply terminals and input terminals: AC 1500 V for 1min.
  Weight	Approx. 900 g
  Unit Indication	Designated character is adhered at the right bottom of the front mask. (It has to be designated at the time of ordering.)
  Protection Degree	Front side IP40, back side IP20