TSURUGA MODEL NRW-80H/NRW-80HL

Specification / Model			NRW-80H NRW-80HL	NRW-110H NRW-110HL
NRW - □ □     ① ② ① Size 80 110   ② Setting HL H
H : High value setting, relay contact output HL : High and Low value setting, relay contact output
Dimension (mm)	80(W)×80(H)		●	-
	110(W)×110(H)		-	●
Weight (1 mA d.c. rated)			approx. 550 g	approx. 1,400 g
Type			Wide angle
Input (*)	DC Current	(Moving coil)	10 μA to 5 A	1 mA, 10 mA to 5 A
	DC Voltage	(Moving coil)	10 mV to 300 V	1 V to 300 V
	Receiver	(Moving coil)	4 to 20 mA, 1 to 5 V(500 kΩ)	4 to 20 mA, 1 to 5 V(4 kΩ), 1 to 5 V(1 MΩ)
	AC Current	(average)	1 to 300 mA (with 7311)	1 to 300 mA
		(r.m.s., 1 A or more)	1 to 5 A (CT incorporated), 10 to 30 A (with 7311)
	AC Voltage	(average)	10 to 300 V
Display	Accuracy	Class 1.5	-	●
		Class 2.5	●	-
	Scale length		121 mm	170 mm
	Scale divisions		30 to 50
	Scale Pointer		Wide angle, black
	Scale plate color		White
	Cover color		Black
Output	Operation type	Optical	-	●
		Electrical	●	-
	Output		Hold (latching relay for NRW-110)
	Pointer		Knife shape H(High) : Red, L(Low): Green
	Setting range		0 to 100 % of scale for H and L
	Setting		HL (High / Low)　or　H (High)
	Minimum setting range (*2)		Less than 3 %
	Pick up accuracy (*2)		Less than 1.5 %
	Deadband (*2)		Less than 0.5 %
	Temp. coefficient (*2) (pick up value change at 23°C ± 10°C)		Less than 0.3 %
	Power regulation (*2) (pick up value change at rated voltage ± 10%)		Less than 0.3 %
	Output contact		1 transfer for H and L (NRW-110: Latching relay)
	Contact rate (load resistance)		250 V, 3 A a.c. 30 V, 2 A d.c.
	Power on delay		○	○
	Operation delay		○	-
100/110,200/220 V AC			●	●
24 V DC			○	○
Power consumption			2 VA or less
Operating temperature			0 – 50°C
Operating humidity			30 to 90% RH (no condensation)
Weight (1 mA d.c. rated)			approx. 550 g	approx. 1,400 g

*1

When the rated input exceeds the specific standard, accessory is included with product.

*2

It is the value against the scale length.

●：Standard, ○：Option

Customers are requested to provide the following information during order.

1. 1. Model ( HL or H )
2. 2. Rated value (Input signal with AC or DC type)
3. 3. Scale and Unit
4. 4. Power supply
   ・AC 100/110 V ± 10% or AC 200/220 V ± 10% ( 50/60 Hz )
   ・DC 24V ± 10%