|
Measuring method |
AC 4 terminal method (Resistance measurement) |
|
Measuring frequency |
AC 1 kHz ± 20 Hz (Resistance measurement) |
|
Sampling cycle |
10 times / s. (Resistance, voltage measurement) |
|
Measurement terminal |
Connector of 2.54 mm pitch, MIL-C-86503 standard |
|
Wiring resistance |
Source side: Less than 0.1 Ω |
|
Display |
LCD display
Resistance measurement: 35000
Voltage measurement: 50000 (with polarity indication) |
|
Measuring mode |
|
Automatic measurement: |
Measure resistance and voltage from CH 1 till set CH,
then switched to waiting.
'AUTO' mode: The measured data is saved in 356M, the data can be downloaded to PC.
'FULL' mode: Each measurement of each CH is output. |
|
Manual measurement: |
Resistance and voltage of manually set CH are measured. |
|
Measuring time
(During automatic measurement) |
Select 1 s. or 2 s. for one CH
Measuring time of 1 s.:aprx. 900 ms., 2 s.: aprx.1900 ms. |
|
Judgment |
Upper limit (H1, H2) can be set.
|
Output condition: |
The resistance of more than 1 CH > H1・・・ Relay ON
The resistance of more than 1 CH > H2・・・ Relay ON |
|
Contact capacity: |
AC 250 V, 1 A (Resistance load), 1 A. 1a contact |
|
|
Insulation resistance |
DC 500 V, more than 50 MΩ |
|
Withstanding voltage |
AC 1500 V, 1 min. |
|
Power supply tolerance |
AC 90 to 250 V (356M, 5811-71) |
|
Operating ambient temperature |
0 to 50 ℃ |
|
Storage temperature |
-20 to 70 ℃ |
|
Weight |
356M aprx. 1 kg, 5811-71 aprx. 1 kg |
|
Dimension |
205 (W) x 64 (H) x 169 (D) mm |
|
Serial communication RS-232C |
|
Transmission system: |
Start-stop synchronization full duplex |
|
Transmission rate: |
2400, 4800, 9600 bps |
|
Data bit length: |
7 bit, 8 bit |
|
Stop bit: |
1 bit |
|
Xon, Xoff: |
No Control |
|
|
Accessory |
|
356M |
Utility software (CD) |
1 pc |
|
RS-232C cable |
1 pc |
|
Power cord |
1 pc |
|
Power fuse |
1 pc |
|
Operation manual |
1 pc |
|
|
5811-71 |
Power cord |
1 pc |
|
Unit connect cable |
1 pc |
|
|
Measurement cable |
Not included, manufacturable based on meeting with us. |
