| Item Code | 291016 |
|---|---|
| Model | AW83Z |
| Washing water temp. | Supplied temp. to 80℃ |
| Accessories | Supply hose I.D.18mm, 2m×1pc, Drain hose (with coupler) 2m×1pc, Detergent (Amorphous phosphorus) 1kg, Measuring spoon (for 50ml) 1pc, Test tube rack support 1pc, Hose clamp 1pc |
| Washing compartment | Two washing chambers |
| Washing compartment | Pressure water jet from two directions; Top and bottom, Jet nozzle spinning |
| Washing compartment | Fixed rack (Changeable to batch type jet rack) |
| Washing pattern | Selectable three washing patterns *Final rinse is option |
| Washing pattern | 1. Pre-washing → Washing → Rinse → Final rinse* |
| Washing pattern | 1. Pre-washing → Washing → Rinse → Final rinse* |
| Washing pattern | 3. Rinse → Final rinse* |
| Washing time | Pre-washing, Washing, Rinse: settable 1 to 99min |
| Washing time | Rinse: settable up to 5 times by batch system |
| Washing time | Final rinse (to connect with pure water supplying system): Rinse by pure water 50L, settable up to 5 times, start to wash after reaching to the set water level, Timer count starts after reaching to the setting temp. |
| Supplying water temp. | Room temp. to 80℃ |
| Washing water temp. | Same water temp. for pre-washing and washing, no water heat-up for rinse and final rinse |
| Liquid detergent supplying type | Automatic supply by pump (Adjustable supply amount) |
| Liquid detergent tank capacity | 2L |
| Required water amount | Approx. 28L for each pre-wash, wash and rinse |
| Hot water supply system | Heater (Built-in: 6kW) heat-up or connection to primary hot water supply |
| Container stand | Shelf board 2pcs. (Standard) |
| Water supplying system | Electromagnetic valve Open/Close, water flow amount is fixed by flow switch |
| Water drain system | Forced drain by pump |
| Exterior | Cold rolled steel plate with melamine resin baking finish |
| Interior | Stainless steel |
| Pump | Washing pump: 355W/560W Drain Pump: 45W |
| Shelf board | 550×550mm, max. load 245N (25kg) |
| Internal dimensions（W×D×H mm） | 600×630×1080mm |
| External dimensions（W×D×H mm） | 860×770×1795mm |
| Power Source |
AC220V 28A Three phase with step down transformer |
| Weight | 220kg |
Malaysia
