Forced Convection Oven (DKN912): Top Choice in Selangor, Malaysia, Kuala Lumpur (KL), Puchong Renetech Sdn Bhd

Description

Standard ''Best Seller'' ovens - Fully programmable

Features of Forced Convection Oven (DKN912)

Standard forced air convection ovens
Standard forced air convection ovens are programmable and come with extended functions and safety features.
Best seller based on excellent performance & affordability
Superior temperature accuracy
DKN302/402/602/612 come with observation windows
Programmable PID controller for easy program settings 30-step, 3-pattern program controller with repeat functions
Fixed setting, programmed, Quick Auto stop, Auto stop, and Auto start operating modes with easy control capabilities
Increased safety and Self-diagnostic function
Over-heating prevention and calibration off-set are possible with auxiliary functions
Easy to use and maintain
Built in exhaust ports

Safety features

Self diagnosis functions (Temperature sensor abnormal, Heater disconnection, SSR-short) Automatic overheating prevention, Electric leakage breaker with over current protection, Key lock function

Specifications

Item Code	212875
Model	DKN912
Circulation method	Forced air circulation
Operating temp. range	RT +10°C to 210°C
Temp. adjustment accuracy	±1℃（at 210℃）
Temp. distribution accuracy	±2.5℃（at 210℃）
Max. temp. reaching time	Approx. 60min.
Interior/Exterior material	Stainless steel / Cold rolled steel plate with melamine resin baking finish
Heat insulating material	Glass wool
Heater	Stainless pipe heater
Heater	1.8kW x 2
Fan Type / Fan Motor	2pc / 10W
Cable hole	30mm I.D. (on the right side) 1pc.
Exhaust port	30mm I.D. x 2 (the back)
Observation window	None
Temp. controller	3 patterns program controller, PID control by microprocessor
Temp. setting method	Digital setting by UP/DOWN key
Temp. display	Measurement temp. : Digital display by green LED Setting temp. : Digital display by red LED
Timer	1 min. to 99 Hrs. 59 min. and 100 Hrs. to 999 Hrs. 50 min. with timer wait function
Operation function	Fixed temperature operation, Program operation, Auto start, Quick Auto-stop
Program mode	Program operation : 3 patterns, 30 steps(30 steps×1, 15 steps×2, 10 steps×3) Pattern repeat function
Additional functions	Calibration off-set function, Key lock, Uninterruptible power for memory
Heater circuit control	SSR control
Sensor	K-thermocouple
Safety device	Self diagnosis functions (temp. sensor abnormal, Heater disconnection, SSR- short, Automatic overheating prevention), Key lock function, Overheat prevention, Electric leakage breaker with over current protection
Shelf plate with standard load	~15kg/piece
Shelf support step number/pitch	29 steps x 2 / 30mm
Shelf plate	Stainless steel, 1pc on the bottom screwed (DKN912C, 2 pcs)
Shelf plate / support	8 pcs. / 16 pcs.
Internal dimensions（W×D×H mm）	1070×500×1000mm
External dimensions（W×D×H mm）	1180×651×1616mm
Remarks(dimensions)	535L
Power Source	AC220V 18A Single-phase
Weight	190kg

Maintenance and warranty

Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)

External dimensions do not include protrusions.

More detail about Renetech Sdn Bhd