About TAKISAWA NEX-906
| ITEMS | UNIT | NEX-906 | |||
| CAPACITY | Maximum Swing | mm | 650 | ||
| Swing On Cross Slide | mm | 440 | |||
| Standard Turning Diameter | mm | 250 | |||
| Max Turning Diameter | mm | 240 | |||
| Max Turning Length | mm | 350 | |||
| Max Bar Work Capacity | mm | 52/35 | |||
| TRAVEL | X-Axis Travel | mm | 160 | ||
| Z-Axis Travel | mm | 425 | |||
| Y-Axis Travel | mm | ±40 | |||
| B Axis Travel | mm | 485 | |||
| SPINDLE | Spindle Speed | rpm | 5,000 | ||
| Chuck Size | 6” | ||||
| Spindle Nose | A2-6 | ||||
| Through HoleDia | mm | 63 | |||
| Bearing Diameter | mm | 100 | |||
| TURRET | Number Of Tool | T12 | |||
| Turning Tool Shank | mm | 20 | |||
| Boring Bar Shank Dia | mm | 32 | |||
| Milling Speed | rpm | 6,000 | |||
| Max Bush Diameter | mm | 16 | |||
| Sub Spindle | Spindle Speed | rpm | 5,000 | ||
| Chuck Size | 6” | ||||
| Spindle Nose | A2-5 | ||||
| Through Hole Diameter | mm | 44 | |||
| Bearing Diameter | mm | 90 | |||
| FEEDRATE | X-Axis Rapid Traverse Rate | m / min | 20 | ||
| Z-Axis Rapid Traverse Rate | m / min | 24 | |||
| Y-Axis Rapid Traverse Rate | m / min | 10 | |||
| B-Axis Rapid Traverse Rate | m/min | 20 | |||
| MOTOR | Spindle Drive Motor | kw | 7.5/11 | ||
| Sub Spindle Drive Motor | kw | 5.5/7.5 | |||
| Turret Index Motor | kw | 1.2 | |||
| X Axis Drive Motor | kw | 2.5 | |||
| Z Axis Drive Motor | kw | 2.5 | |||
| Y Axis Drive Motor | kw | 1.8 | |||
| B Axis Drive Motor | kw | 1.2 | |||
| Milling Motor | kw | 2.2/3.7(3.7/5.5) | |||
| SIZE | Height | mm | 2,000 | ||
| Width | mm | 1,860 | |||
| Depth | mm | 2,550 | |||
| Weight | kg | 4,500 | |||
| •Specification is subject to change without further notice. | |||||
Malaysia
