DKSB Engineering (M) Sdn Bhd provides reliable Ebara chiller water pump inspection, servicing, and repair to help you stop leaks, reduce vibration, and restore stable chilled water circulation. We support facilities across Kuala Lumpur and Selangor with practical solutions and clear reporting.
Ebara chiller water pump servicing checks and restores the pump’s internal condition so it can run smoothly and circulate chilled water reliably. This typically includes inspection, cleaning (where needed), replacement of worn parts (when required), and a test run to confirm stable operation.
Service your Ebara chiller water pump when you notice leakage near the shaft area, new noise, strong vibration, reduced chilled water flow, frequent trips, or repeated alarms. Early servicing often prevents bigger breakdowns and reduces downtime risk.
Most pump issues are predictable. Early detection helps avoid water damage, chiller downtime, and energy loss.
Misalignment can increase load and speed up wear on internal parts.
Worn sealing surfaces can cause leaks near the shaft area.
Vibration from imbalance or looseness can reduce part life quickly.
Dirty water, corrosion, or debris can damage surfaces and reduce efficiency.
Common warning signs: unusual noise, higher motor current, frequent trips, seal leakage, hot bearing area, or recurring vibration alarms.
We use a clear workflow to reduce risk and restore stable operation. You receive a straightforward report that helps with maintenance planning.
Confirm symptoms (leak/vibration/noise) and check base and coupling condition.
Open pump safely and assess bearing area, shaft surfaces, and sealing area.
Replace worn parts (such as bearings or mechanical seals) based on pump specification and condition.
Reassemble, align, and run a test to verify stable operation and reduced issues.
Downtime depends on access, pump condition, and parts availability. We prioritize safe work practices and a stable restart.
| Scope item | Purpose | Notes |
|---|---|---|
| Inspection & diagnosis | Confirm root cause of leak, noise, or vibration | Helps prevent repeat failures |
| Bearing replacement (if needed) | Stabilize rotation and reduce friction | Correct fit and lubrication are important |
| Mechanical seal replacement (if needed) | Stop leakage at the rotating shaft area | Seal type must match operating condition |
| Alignment & test run | Reduce vibration and confirm stable operation | Recommended after major disassembly |
For mission-critical sites, planned shutdown maintenance helps reduce downtime risk and supports smoother restart.
Malaysia
