Freshliance — Bluetooth Audible & Visual Alarm
BlueTag A100 Bluetooth Audible and Visual Alarm is a stand-alone warning device that detects alarm messages from Freshliance Bluetooth temperature/humidity data loggers via Bluetooth wireless communication. It gives warning signals through four flashing red LEDs and an alarm speaker greater than 80 dbm when any alarm message is detected. It can be widely used in families, schools, factories, communities, convenience stores, and private villas, etc.
| Working temperature | −10°C ~ 50°C |
|---|---|
| Power interface | Power plug |
| Detection range | ≥ 5 m |
| Power input | 9V ~ 12V |
| Stand-by power consumption | ≤ 25 mA |
| Alarm power consumption | ≤ 300 mA |
| Installation | 3M adhesive tape, screws |
| Alarm mode | Audible and visual alarm |
| Sound intensity | > 80 dbm (at 1 m) |
| Dimensions | 122 × 72 × 43 mm (L × W × H) |
| Weight | 100 g |
Recommended Distance from Bluetooth Data Loggers
| Model | Max. distance recommended |
|---|---|
| BlueTag T10 | 10 m |
| BlueTag T100 | 5 m |
| BlueTag TH100 | 5 m |
| BlueTag TH20 | 5 m |
| BlueTag TH10 | 10 m |
| BlueTag TH30 | 5 m |
After power up, this audible and visual alarm automatically scans all the broadcast signals sent by surrounding Bluetooth data loggers via Bluetooth wireless communication in real time, no pairing required.
When any alarm messages are detected among the broadcast signals, this Bluetooth alarm automatically gives a sound and light alarm via four flashing red LEDs and an alarm sound greater than 80 dbm for maximum impact. The alarm lasts up to 90 seconds, and a mute button is provided for users to mute the alarm sound as necessary.
This alarm device is designed to be continuously powered via the mains, so as to ensure power system stability and minimize the disturbances caused by voltage variations.
It has also been designed with a wide power supply voltage range from 9V to 12V, easy to use in different regions and countries. In addition to the standard power adaptor, users can also customize an adaptor as needed.
This alarm device is protected with a high-quality case of high transparency and fine shock, heat and cold resistance, so as to ensure stable performance.
This device can be easily installed with 3M adhesive tape or two screws. Once plugged in, it starts to work — no programming needed.
BlueTag A100 can be widely applied in large hoisting machinery, engineering vehicles, banks, government agencies, buildings, villas, forest parks, border defense systems, security service companies, and other areas. It watches over all related BlueTag temperature and humidity data loggers and alerts you to potential problems before disaster strikes.
Malaysia
