TL;DR: Choose lubtex texgrease hammer hd 2 for heavy earth-moving machinery in Malaysia
Maintains structure at high operational temperatures due to a non-melt thickener base.
Resists water wash-off and displaced coverage during heavy rainfall or wet site conditions.
Adheres to metal surfaces under continuous vibration to minimize leakage and run-out.
Prevents dust and abrasive contaminants from entering tool bushings.
Withstands extreme impact loads without metal-to-metal contact via a solid graphite barrier.
| Property | Specification / Value | Test Method |
| Thickener Type | Bentone | - |
| Base Oil Type | Semi-Synthetic | - |
| NLGI Classification | 2/3 | - |
| Color / Appearance | Black / Smooth adhesive grease | - |
| Worked Penetration | 230–260 | IP 50 |
| Dropping Point | >260°C | IP 132 |
| Water Washout @ 39°C | 2% | ASTM D1264 |
| Four Ball Weld Load | 500 kg | IP 239 |
| Operating Temperature | -5°C to 150°C | - |
| Oxidation Stability (100h) | 2 psi pressure drop | IP 142 |
| Oxidation Stability (400h) | 5 psi pressure drop | IP 142 |
| Copper Corrosion | Pass | IP 112 |
Lubrication of the tool shank, bushings, and chisels on large excavator-mounted hydraulic breakers and hammers.
Protection of pins and bushes on large earth-moving equipment and off-road heavy plant machinery.
Heavy-load lubrication of exposed industrial open gear systems.
Do not use in high-speed, enclosed rolling element bearings, electric motor bearings, or automotive wheel bearings.
Do not use in small, handheld electric or pneumatic power tools requiring low-viscosity fluid greases.
The Bentone clay thickener does not possess a conventional melting point, allowing the grease to remain stable above 260°C where standard lithium greases liquefy and run out.
High concentration of laminar graphite solids forms a physical boundary layer on the metal surfaces, protecting parts from wear even when extreme shock loads temporarily squeeze out the semi-synthetic base oil.
The high NLGI 2/3 stiffness combined with inherent adhesive properties creates a physical seal against high ambient dust levels common in tropical construction and quarrying zones.
Suitable for: Quarry operators, infrastructure contractors, and heavy machinery maintenance workshops managing large excavator attachments and heavy earth-moving equipment.
Not suitable for: General automotive mechanics, residential DIY consumers, or technicians repairing handheld power tools like rotary hammers and small demolition chisels.
Clean the hydraulic breaker tool shank and housing bushing to remove old grease, dirt, and moisture before application.
Load the product into a standard grease gun using a 400g cartridge, or prepare the bulk 16kg pail for manual or central pump application.
Apply the grease while the hydraulic breaker is positioned vertically with down-pressure applied to the chisel tool to prevent grease from entering the impact chamber.
Pump the grease until clean compound appears around the bottom bushing sleeve.
Reapply at regular intervals specified by the equipment manufacturer, typically every two hours of continuous operation.
Pumping grease into a hydraulic breaker while the tool steel is hanging free, which forces grease into the piston chamber and causes hydraulic locking or seal failure.
Mixing the Bentone thickener grease with incompatible lithium or polyurea greases, which destroys the thickener structure and causes severe oil separation.
Using this grease in high-speed rotating bearings, which will cause overheating and bearing seizure due to the high solid graphite content and stiff NLGI grade.
Ensure operators wear appropriate protective gloves and safety glasses during manual handling to avoid prolonged skin contact.
Collect used grease and empty packaging according to local environmental regulations; do not dispose of waste in water drainage systems.
Store pails vertically in a cool, dry area away from direct sunlight and incompatible oxidizing agents to maximize storage life.
Technical Data Sheets (TDS) and Safety Data Sheets (SDS) are available upon request to support safety management system compliance.
Malaysia
