Main features
1 Clear any position (ON/O)
2 metric conversion (mm/in)
3 When measuring, press the M key to enter the HOLD state, and the screen will keep the measured value at this time. 4 Record the maximum value (MAX) during the continuous measurement process.
5 Record the minimum value (MIN) in the continuous measurement process
6 Record the difference between the maximum value (MAX) and the minimum value (MIN) (=MAX-MIN) during continuous measurement, which is used for the measurement of flatness and coaxiality.
7 During the measurement process, it automatically determines whether the workpiece is qualified (TOL) according to the set upper and lower limit dimensions, without relying on the memory of the operator.
8 Measured in an absolute way (ABS), the data read by the scale is the actual size of the workpiece.
9 Measure in a relative way (REL), the data read by the scale is not the actual size of the workpiece, but just a relative value.
10 The measured data can be transmitted through the data acquisition system (DATA)
◎ The USB data cable plug and battery cover are tightened with screws to ensure more reliable connection.
◎ The digital display part can be rotated 300 degrees, which is convenient for reading.
Malaysia
