UV Test Chamber: Pilihan Utama di Selangor, KL, Malaysia Obsnap Instruments Sdn Bhd

Penerangan

UV test chamber Model: MUV-080
UV Test Chamber Main Parameters:

UV-A or UV-B lamp, 8 pcs
Spectral stability, lamp life 5,000 hours
Good simulation of ultraviolet light in sunlight
Simulates condensation that is consistent with natural wet conditions

Description of UV Test Chamber

UV test chamber (also called UV aging test chamber, UV light test chamber, or UV accelerated weathering tester) can simulate environmental conditions such as ultraviolet, rain, high temperature, high humidity, condensation, and darkness in natural climate. By recreating these conditions, they are combined into one cycle, and it is automatically executed to complete multiple cycles.

The UV light test chamber is suitable for accelerated weathering tests of paint, ink, chemical, rubber, paint, adhesive, and etc.

Parameter of UV Test Chamber

Model	MUV-080
Inner chamber sizeW×H×D(cm)	40×50×40
Exterior chamber sizeW×H×D(cm)	Depends on the chamber design
Performance	Temp.range	R.T.+10℃～70℃
	Humi.range	75% RH～95%RH
	Rain time	1～9999mins,adjustable
	Rain period	1～240mins, interval adjustable
	Light model	UV-A（295~360nm), UV-B(280~315nm) optional
	UVA/UVB light power	40W(lifetime 1800h)
	Irradiance	1.0W/m2 adjustable
	Standard specimen size	75x150mm or 75x300mm
	Control accuracy	±0.1℃, ±1%RH
System	Temp.controller	Imported LED digital display PID+SSR microcomputer integrator
	Sensor	Perkin resistance PT100Ω/MV
	Time controller	Imported programmable time controller
	Heating system	Nichrome heater
	Condensation humidification system	Stainless steel humidifier
	Blackboard temp.	Metal blackboard thermometer
	Water supply system	Auto water filling system
	Circulating system	Quiet motor,multi-vane centrifugal fan
Material	Exterior chamber material	Stainless steel
	Inner chamber material	SUS#304 stainless steel
	Sample holder material	SUS#304 stainless steel
Standard configuration	Standard sample holder 24pcs,light tubes 8pcs(UVA/UVB)
Safety Protection	Leakage, short circuit, over temp.,water shortage, over current protection
Power supply	AC 1Ψ220V 60/50Hz
Operation condition	5℃ ～＋30℃ ≤85％R.H
Customization service	Non-standard or special requirements are welcomed and available.

Lebih maklumat tentang Obsnap Instruments Sdn Bhd