|
Installation |
Flush |
|
Sensing side diameter |
Ø18mm |
|
Sensing distance |
5mm |
|
Hysteresis(distance) |
Max. 10% of sensing distance |
|
Standard sensing target |
18×18×1mm(iron) |
|
Response frequency |
500Hz |
|
Indicator |
Operation indicator (red LED) |
|
Unit weight (packaged weight) |
≈ 110 g (≈ 122 g) |
|
Power voltage |
12 - 24 VDC (ripple P-P: ≤ 10 %), operating voltage: 10 - 30 VDC |
|
Current specification |
Current consumption: Max. 10mA |
|
Control output |
≤ 200 mA |
|
Residual voltage |
Max. 1.5V |
|
Protection circuit |
Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit |
|
Insulation resistance |
≥ 50 MΩ (500 VDC megger) |
|
Dielectric strength |
Between the charging part and the case: 1,500 VAC~ 50 / 60Hz for 1 min |
|
Vibration |
1.0 mm amplitude at frequency of 10 to 55 Hzin each X, Y, Z direction for 2 hours |
|
Shock |
500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
|
Environment_Ambient temperature |
-25 to 70 ℃, storage: -30 to 80 ℃ (no freezing or condensation) |
|
Environment_Ambient humidity |
35 to 95 %RH, storage: 35 to 95 %RH (no freezing or condensation) |
|
Protection structure |
IP67(IEC standard) |
|
Connection |
Cable type |
|
Cable Standard/material |
Standard type cable (black): polyvinyl chloride (PVC) |
|
Material |
Case/Nut: nickel plated brass (DIA. of sensing side Ø 8 mm connector type case: SUS303), washer: nickel plated iron, sensing side: PBT |
