|
Product Summary |
|
|
Fixed Temp. Incubator from small to large capacity, high functional and best-selling for long years |
|
|
|
|
Features |
|
|
A compact model ideal for preserving samples and for constant temperature testing |
|
A CFC-free, low-vibration model with a cooler equipped with peltier elements |
|
Uses a programmable temperature controller (IJ201/300) |
|
Has a convenient pre-reset temperature function ( as an option) |
|
Air jacket can be attached as an option |
|
Two units can be stacked by the stacking support (Option) |
|
The IJ101W observation window uses environmentally friendly glass made from combination of energy-saving pair glsass and half-tempered glass, which prevents wasteful heat loss |
|
A sliding mounting table can be provided with the IJ300 model ( as an option) for convenience when setting a microshaker inside and when adding / removing samples. The service outlet on the side of the unit does not require any wiring. A shaker cannot be set in the IJ101W model. |
|
Safety has been enhanced with the addition of a self-diagnostic function, an overheat prevention device and an over-current circuit breaker. |
|
|
|
|
|
|
|
Specifications |
|
|
Specification Item |
Details |
|
Model |
IJ302 |
|
Type |
Forced convection |
|
Temperature range |
5～60℃（at room temp.25℃） |
|
Temp. Control Accuracy |
±0.5℃（at 37℃） |
|
Temp. Distribution Accuracy |
±1.0℃（at 37℃） |
|
Time to Max. Temp. |
20～60℃ 60min. |
|
Time to Lowest Temp. |
20～5℃ 120min. |
|
Interior |
Stainless steel |
|
Heater |
Pipe heater 300W |
|
Condenser |
Peltiert element, Forced radiation type |
|
Temp. Control Method |
PID |
|
Operation Function |
Program operation (30 steps x 1, 15 steps x 2, 10 steps x 3), Fixed operation, Quick auto-stop, Auto-stop, Auto-start operation |
|
Additional Functions |
Calibration off-set, Key-lock function, Auto recovery function at power failure |
|
Sensor |
Double sensor: Platinum resistance Pt 100Ω (Temp. controller), K-thermocouple(Overheat preventor) |
|
Safety Functions |
Self-diagnostic function(Temp. sensor error, heater failure, SSR short-circuit, Auto overheat), Overheat prevention(IJ201/301), Liquid pressure overheat preventor, Over-current ELB, Main relay error |
|
Shelf Loading Capacity |
Approx. 10kg/ shelf |
|
Shelf Step |
10 steps |
|
Accessories |
Shelf(Stainless punching metal) 2pcs., Shelf support 4 pcs., Receiver for drain 1pc. |
|
Internal dimensions（W×D×H mm） |
350×350×350mm |
|
External dimensions（W×D×H mm） |
470×496×665mm |
|
Remarks(dimensions) |
43L |
|
Power Source |
AC115V/AC220V single phase with step-down transformer |
|
Weight |
37kg |
Malaysia
