|
Product Summary |
|
|
Program operation for 6 patterns of natural convection is possible |
|
|
|
|
Features |
|
|
The set temperature, measured temperature, and overheat prevention set temperature can be displayed at the same time, and the program operation, quick auto stop, auto stop, and auto start functions can be set with simple key input. |
|
Equipped with 6 patterns of program controllers (30 steps x 1, 15 steps x 2, 10 steps x 3). |
|
Equipped with sub-functions such as overheating prevention temperature setting, calibration offset function, key lock function, and program repeat function. |
|
Self-diagnosis circuit (temperature sensor error, heater disconnection, memory error, internal communication error, temperature input circuit error, automatic overheating prevention function, SSR short circuit), overheating prevention device, overcurrent leakage breaker, and other safety functions are available. |
|
Remarks : If a sample that generates heat is placed in the oven, the temperature may not be controlled normally. |
|
|
|
|
|
|
|
Specifications |
|
|
Specification Item |
Details |
|
Model |
DVS603 |
|
Method |
Natural gravity convection |
|
Operating temperature range |
Room temp.＋5～260℃ |
|
Temp. adjustment accuracy |
±1℃（at 260℃） |
|
Temp. distribution accuracy |
±5℃（at 260℃） |
|
Max. temp. reaching time |
Approx. 90 min. |
|
Interior material |
Stainless steel |
|
Exterior material |
Electrogalvanized steel sheet paint |
|
Heat insulating material |
Glass wool |
|
Heater |
Stainless pipe heater |
|
Heater |
1.36kW |
|
Observation window |
250×280 mm Chemically strengthened glass×3 |
|
Cable hole |
30 mm l.D.×1 pcs.(right side) |
|
Exhaust port |
30 mm l.D.×2 pcs.(on top) |
|
Temp. controller |
P.I.D. control |
|
Temp. setting method |
Digital setting method using the dedicated operation menu key and ▲ ▼ key |
|
Temp display method |
Measurement temperature display: Green LED digital display (resolution: 1 ° C) Set temperature display: Red LED digital display (resolution: 1 ° C) |
|
Timer |
0 minutes to 99 hours 59 minutes and 100 to 999 hours 50 minutes (timer weight function, ON / OFF possible) |
|
Operation function |
Fixed value operation, program operation, quick auto stop, auto stop, auto start, program auto start |
|
Program mode |
Program operation 6 pattern selection (30 steps x 1, 15 steps x 2, 10 steps x 3), step weight function, step hold function, step skip function |
|
Additional functions |
Calibration offset function, key lock function, power failure recovery mode selection function, pattern repeat function |
|
Heater circuit control |
SSR drive |
|
Sensor |
KK thermocouple (for temperature control, for independent overheating protector)-thermocouple |
|
Safety device |
Self-diagnosis function (temperature sensor abnormality, heater disconnection, SSR short circuit, memory abnormality, internal communication abnormality, temperature input circuit abnormality, |
|
Safety device |
automatic overheating prevention function), overheating prevention device, overcurrent leakage breaker |
|
Shelf plate load |
Approx. 15kg / pcs. |
|
Shelf support step number / pitch |
13 steps / 30mm |
|
Shelf plate / Shelf bracket |
Stainless punching metal, 2 pcs. / 4 pcs. |
|
Internal dimensions（W×D×H mm） |
600×540×500mm |
|
External dimensions（W×D×H mm） |
710×651×870mm |
|
Internal capacity |
162L |
|
Power Source |
AC220V Single-phase with step down transformer |
|
Weight |
63kg |
Malaysia
