CUSTOM Fully automatic flexible clamp meter CFL-02R

It is now more affordable than the previous model (CFL-01U) ^{*2 !}

• The cable can be freely shaped, making it easy to measure even in tight spaces.
• The true RMS method allows the display of RMS values  for waveforms other than sine waves.
• Current and frequency can be displayed simultaneously on the LCD screen.
• Adopts a hand grip style that allows for a firm grip.
• The LCD screen is equipped with a backlight to make it easier to check values  even when measuring in a dark place.
• Equipped with an LED light that brightly illuminates the object to be measured, making it easier to work in dark places.
• The data hold function allows you to check the measured values  at your leisure.

Usage example

AC current measurement image

After removing the clamp sensor coil at the joint, clamp the object to be measured.

LED light function brightly illuminates the object being measured

 

Equipped with a backlight LCD for easy viewing even in dark places

 

*Please wear protective insulating equipment when measuring or in areas where electric shock is expected.

Part names

Main unit

• ①Clamp sensor coil
• ②LED light
• ③Clamp sensor connection part
• ④Display section
• ⑤Backlight button
• ⑥ LED light button
• ⑦Hold button
• 8. Power button

display

• ① Battery level display
• ②Auto mode display
• ③Data hold display
• ④DC voltage mode
• ⑤AC voltage mode
• ⑥ Main display
• ⑦Unit display
• ⑧ Sub display
• ⑨Auto power off function enabled indicator

 

360° rotating image

Clicking on the image will open a new window.

 

▲Back to top of page

specification

Electrical Performance

Flexible clamp part

	range	resolution	Accuracy	frequency
ACA	0.2 to 10 A	0.01 A	±(2.0% rdg + 10 dgt)	40 to 65 Hz
	10 to 60 A	0.01 A	±(1.5% rdg + 5 dgt)
	60 to 600 A	0.1 A
	600 to 3000 A	1 A	±(2.0% rdg + 5 dgt)
	0.2 to 60 A	0.01 A	±(2.5% rdg + 5 dgt)	65 to 200 Hz
	60 to 600 A	0.1 A
	600 to 3000 A	1 A	±(3.0% rdg + 5 dgt)
	0.2 to 60 A	0.01 A	±(3.0% rdg + 5 dgt)	200 Hz to 1 kHz
	60 to 600 A	0.1 A
	600 to 1000 A	1 A
frequency	40 to 1000 Hz	0.1 Hz	±(0.5 % rdg + 2 dgt) at 3 A or more	-

*At 23±5°C, 80% RH or less
*Accuracy is the value measured at the center of the clamp sensor coil.　Accuracy guaranteed range: AC60A range: 0.2 to 60 A, AC600A range: 60 to 600 A, AC3000A range: 600 to 3000 A

Error due to conductor position

Accuracy is specified at the center of the clamp sensor coil. Add the following value to the accuracy depending on the distance from the center of the clamp sensor coil to the center of the conductor not being measured.

	Distance from center	Addition to accuracy
A	Radius 35 mm (Φ70)	±0.5%
B	Radius 50 mm (Φ100)	±1.5%
C	Radius 60 mm (Φ120)	±2.0%
D	Radius 60 mm (Φ120) or more	±5.0%

 

General specifications

Detection method	True RMS
display	LCD display, 6000 counts
Range switching	Auto
Maximum measurement conductor diameter	φ120 mm
sampling	Approximately 3 times/second
Auto Power Off	Approximately 5 minutes (cannot be canceled)
Operating temperature and humidity	0 to +40°C, 80% RH or less (no condensation)
Storage temperature and humidity	-10 to +60°C, 80% RH or less (excluding batteries, no condensation)
size	Approx. W 178 × H 324 × D 30 mm
weight	Approximately 188 g (including batteries)
power supply	3 x AAA batteries
battery life	Up to approximately 70 hours (when using alkaline batteries) *3
accessories	Storage case, instruction manual
proofreading	Possible
Compliance standards	EN61010-1, EN61010-2-032, EN61326-1 CAT III 1000V, CATIV 600V
JAN	4983621090239

*3 Heavy use of the backlight will shorten battery life.