CUSTOM Digital Multimeter CDM-36

Handy size that fits in the pocket of your work clothes. A convenient model with multiple functions and true RMS measurement.

• Comes with a backlight function that allows you to check measurement results even in dark places.
• Supports overvoltage category CAT III 600V. Can measure primary circuits from distribution boards to devices and outlets.
• Handy size that fits in one hand.

Part names

• ① Liquid crystal display section
• ② Hold/Backlight Button
• ③ Function dial
• ④ Test lead (10A) terminal
• ⑤ Test lead (COM) terminal
• ⑥ Test lead (V/Ω/Hz/capacitor/diode/continuity/mA) terminal
• ⑦ SEL button (SEL)
• ⑧ Stand
• ⑨ Battery cover
• ⑩ Probe cover
• $j Barrier part of test lead
• $k Test leads

▲Back to top of page

specification

Electrical Performance

	range	resolution	Accuracy	remarks
ACV	60 mV	0.01 mV	±(1.0% + 3 dgt)	Input impedance 10 MΩ 40 Hz to 1000 Hz
	600 mV	0.1 mV
	6V	0.001 V
	60 V	0.01 V
	600 V	0.1 V
	750 V	1 V
DCV	60 mV	0.01 mV	±(0.5% + 3 dgt)	Input impedance 10 MΩ
	600 mV	0.1 mV
	6V	0.001 V
	60 V	0.01 V
	600 V	0.1 V
	1000 V	1 V
ACA	60mA	0.01mA	±(1.5% + 3 dgt)	Up to 10 A Within 15 seconds for the 10 A range 40 Hz to 1000 Hz
	600mA	0.1mA
	6A	0.001 A
	10A	0.01 A
DCA	60mA	0.01mA	±(1.2%rdg + 3dgt)	Up to 10 A Within 15 seconds for the 10 A range
	600mA	0.1mA
	6A	0.001 A
	20A	0.01 A
Ω	600 ohms	0.1 Ω	±(0.5%rdg + 3dgt)	Open circuit voltage: approx. 3.5 V
	6 kΩ	0.001 kΩ
	60 kΩ	0.01 kΩ
	600 kΩ	0.1 kΩ
	6 MΩ	0.001 MΩ
	60 MΩ	0.01 MΩ	±(1.5%rdg + 3dgt)
capacitance	9.999 nF	0.001 nF	±(5.0%rdg + 20dgt)	0 to 9.999 mF
	99.99 nF	0.01 nF	±(2.0%rdg + 5dgt)
	999.9 nF	0.1 nF
	9.999 μF	0.001 μF
	99.99 μF	0.01 μF
	999.9 μF	0.1 μF
	9.999 mF	0.001 mF	±(5.0%rdg + 5dgt)

	Buzzer Threshold	remarks
Continuity check	Approximately 50 Ω	Open circuit voltage: approx. 1.0 V

	range	resolution	remarks
Diode Check	0 V to 3 V	1 mV	Open circuit voltage: approx. 3.5 V

	Measurement range	Accuracy	frequency
frequency	1 Hz to 9.999 MHz	±(0.1%rdg + 2dgt)	1.0 Vrms or more, sine wave, 50% square wave
DUTY	5.0 to 99.0%	±(0.1% + 2 dgt)	10 Hz to 1 kHz, 1.0 Vrms or more, square wave

*Accuracy guarantee for AC voltage/current is limited to sine waves
. *At 23±5°C, 75% RH or less

General specifications

Detection method	True RMS
display	LCD, maximum display “6000”
Range switching	Auto
Overrange display	"OL" mark display
Low battery indicator	When the battery voltage drops, a battery symbol is displayed.
polarity display	Automatic switching, only "-" displayed
sampling	Approximately 3 times/second
Auto Power Off	Approximately 15 minutes (can be canceled)
Operating temperature and humidity	0 to +40°C, 75% RH or less (no condensation)
Storage temperature and humidity	-20 to +60°C, 80% RH or less (no condensation)
size	Approx. W 65 × H 130 × D 32 mm
weight	Approximately 130 g (including batteries)
Test lead length	Approximately 75cm
power supply	2 x AAA batteries
battery life	Approximately 400 hours (when using alkaline batteries)
accessories	Instruction manual, test leads
option	600 mA fuse: DMF-3606 10A fuse: DMF-3610 Replacement test lead: ATL-3N.html
proofreading	Possible
Compliance standards	IEC61010-1 CAT II 1000V, CAT III 600V
JAN	4983621100471

*The battery included with this device is a sample. It may have a shorter battery life than regular commercially available batteries. Heavy use of the backlight/buzzer will shorten the battery life.