A Booster Pump operates under high pressure to ensure water reaches the upper floors of high-rise buildings or maintains industrial process flow. Because these pumps often run 24/7, they are subject to significant mechanical wear. A failing booster doesn't just result in low water pressure—it can cause "water hammer" that damages building pipes or electrical surges that trip main breakers.
EKG (Malaysia) Sdn Bhd specializes in the precision repair of vertical multistage and horizontal booster pumps, restoring your system to factory specifications while avoiding the high cost of a total replacement.
| Symptom | Potential Root Cause | EKG Technical Solution |
| Pulsating Water Pressure | Failed Pressure Tank (Bladder) | Tank Re-charging or Replacement |
| Constant "Hunting" (On/Off) | Pressure Switch / VFD Fault | Controller Calibration or Repair |
| Loud Screeching Noise | Bearing Fatigue / Motor Wear | Bearing Overhaul & Laser Alignment |
| Water Leaking at Base | Mechanical Seal Failure | Seal Replacement & Shaft Polishing |
| Pump Runs but No Flow | Air Lock or Seized Impeller | System Bleeding or Impeller Repair |
We don't just "swap parts." We use digital pressure gauges and ultrasonic flow meters to identify if the issue is mechanical (the pump), electrical (the VFD/Control Panel), or hydraulic (the piping/valves).
Booster pumps generate intense internal pressure. We utilize premium Tungsten Carbide or Silicon Carbide seals that are specifically rated for high-head applications, ensuring a leak-free operation even under maximum load.
If your pump is noisy or running hot, we perform a full motor service. This includes replacing bearings with high-load industrial units and performing an "insulation resistance test" to ensure the motor won't short-circuit.
Many "bumpy" pressure issues are caused by a failed bladder in the pressure tank. We test the air pre-charge and replace the internal membranes to ensure the pump doesn't "cycle" unnecessarily, which saves energy and prevents motor burnout.
For modern automatic systems, we troubleshoot the Variable Frequency Drive (VFD) and pressure transducers. We re-tune the PID logic to ensure the pump ramps up smoothly, eliminating the "water hammer" that often follows a repair.
MEP Integration Experts: We manage the mechanical pump, the electrical controls, and the plumbing integrity as one system.
ISO-Certified Quality: Every repair follows strict international engineering protocols for safety and reliability.
Rapid Response in Selangor: We prioritize booster repairs because we know that water is a vital utility for your tenants or production line.
Documented Performance: After every repair, we provide a technical report showing the "Before and After" pressure and amperage readings.
A minor leak or a strange noise is a warning sign of a major failure. Trust EKG (Malaysia) Sdn Bhd to provide the technical expertise needed to keep your booster system powerful and silent.
Is your booster pump noisy, leaking, or failing to maintain pressure? Contact us now for a free site assessment and a technical quote on our booster pump repair services!
Lebih maklumat tentang EKG M & E SDN. BHD.
Malaysia
