Penerangan
WEBERFILL FINE GROUT 3.5KG
Weberfill fine grout is suitable for grouting or pointing joints between Ceramic Wall & Floor Tiles, Vitrified Homogeneous Tiles, Porcelain Tiles, Mosaics, Quarry Tiles, Terracotta, Marbles, Granites, Slates, Terrazzo, Brick Veneer, Decorative Stones etc. Suitable for use at wall or floor, dry or wet, interior or exterior areas including swimming pools.
APPLICATION PROCEDURE :
- During tiling, allocate minimum joints of 2 mm wide for wall tiling & 3 mm wide for floor tiling.
- Allow adhesive bed to set 24 hours before grouting commences.
- Ensure that joints are dry, clean or free of contaminants.
- Mix weber fill fine grout with clean water (or mix GT mix 1) as per the recommended mix ratio.
- Mechanical mixing is recommended to obtain a uniform coloured mortar. Ensure pigments are thoroughly dispersed during mixing.
- Apply grout into joints using a grout float / rubber squeegee, ensuring joints are fully compacted with grouting mortar.
- Apply to small areas at a time; and clean excess or residue grout promptly using a damp cloth or sponge; before it dries out.
- When grout is sufficiently firm, polish tile surface with a clean dry cloth to remove grout film / haze.
- Allow grout to set for 24 – 48 hours.
DESCRIPTION:
- Colour : Refer Colour Chart
- Density : 1.68 g/cm³
- pH of mix : 10.80
- Dry Solid Content : 100%
- Shelf Life : 12 months
- Inflammability : No
- Toxicity Hazard : No
- Bed Thickness : Up to 3mm wide
- Mix Proportion : 1 pbw water to 2.5 pbw grout (8 ltrs water/ Latex Admixture to 20 kg weber fill fine grout)
- Working Time (Pot Life) : 45 minutes
- Setting Time : 24 hours
- Application Temperature : Above 5°C – 50°C
- Temperature Resistance : 100°C
- Frost Resistance : - 15°C
- Resistance to acids : Fair
- Resistance to alkalis : Good
- Resistance to oil & solvents : Fair
- Damp Resistance : Good
- Flexibility : Fair
Lebih maklumat tentang Chin Chun Hardware Sdn Bhd