Ashing Furnaces KLS-ASH: Pilihan Utama di รัฐสลังงอร์, ปีนัง, มาเลเซีย, สิงคโปร์, ฟิลิปปินส์, ประเทศไทย LINGTEC INSTRUMENTS SDN BHD

Penerangan

T max. 1100 °C and 1200 °C

A series of specially adapted furnaces

In construction identical to the chamber furnaces of the KLS series (page 6), however, these models are specially equipped for the incineration of organic components and feature combustion air pre-heating, protected heating elements and a large exhaust air chimney in the furnace roof.

Combustion air preheating via ceramic inlet channels in the furnace floor
Cover of the heating elements with quartz glass tubes
Generously dimensioned flue in the furnace roof and stainless steel chimney with a height of 350 mm on the furnace
Double-walled design with rear ventilation, exceptionally low outside wall temperature
Parallel guided door moving up-wards, user is protected from hot door insulation surface
Furnace insulation of high-quality fiber materials with low thermal mass
Furnace front frame made of robust lightweight refractory bricks
Abrasion-resistant lightweight refractory brick in the furnace floor
Delivery incl. ceramic base plate
Heating elements mounted on ceramic support tubes and mount- ed in front of the furnace insulation
Powerful heating elements in both sides of the furnace, fast heating rates
Switching via solid state relay, very precise furnace control, wear-free, noiseless

Additional equipment

Controller with extended programming possibilities
Batch temperature measurement and control
Adjustable over-temperature protection to protect furnace and load according to EN 60519-2
Programming and data-logging software and interfaces
Parallel swing door
Charging racks for loading on several levels

Technical Data

Model		T max. [°C]	Inside dimensions [mm] width × depth × height	Volume [l]	External dimensions* [mm] width × depth × height	Power [kW]	Voltage [V]
KLS	05/11/ASH	1100	200 × 250 × 140	7	550 × 580 × 650	2.0	230 1/N
KLS	10/11/ASH	1100	200 × 250 × 200	10	560 × 640 × 720	3.6	230 1/N
KLS	15/11/ASH	1100	220 × 300 × 230	15	560 × 640 × 720	3.6	230 1/N
KLS	30/11/ASH	1100	280 × 380 × 280	30	590 × 690 × 790	6.0	400 3/N
KLS	45/11/ASH	1100	300 × 500 × 300	45	660 × 810 × 820	7.5	400 3/N
KLS	60/11/ASH	1100	400 × 500 × 300	60	760 × 840 × 800	9.6	400 3/N

KLS	05/12/ASH	1200	200 × 250 × 140	7	550 × 580 × 650	2.0	230 1/N
KLS	10/12/ASH	1200	200 × 250 × 200	10	560 × 640 × 720	3.6	230 1/N
KLS	15/12/ASH	1200	220 × 300 × 230	15	560 × 640 × 720	3.6	230 1/N
KLS	30/12/ASH	1200	280 × 380 × 280	30	590 × 690 × 790	6.0	400 3/N
KLS	45/12/ASH	1200	300 × 500 × 300	45	660 × 810 × 820	7.5	400 3/N
KLS	60/12/ASH	1200	400 × 500 × 300	60	760 × 840 × 800	9.6	400 3/N

Lebih maklumat tentang LINGTEC INSTRUMENTS SDN BHD