DDF490
Cordless Driver Drill
18V LXT Brushless Cordless 13 mm (1/2″) 65 N·m (580 in.lbs) Driver Drill
Overview:
The DDF490 is a cordless driver drill powered by an 18V LXT Li-Ion battery. Equipped with a powerful brushless motor, the tool delivers the maximum torque of 65 N·m. With its lightweight and compact design, the tool is easy to handle even in narrow spaces.
The brushless motor provides longer work hours per charge and extended tool life.
Provides increased efficiency with the maximum no-load speed of up to 1,900 rpm.
The 20-stage torque settings allow for fine adjustments to suit the task at hand.
A mechanical 2-speed gearing allows for choosing between maximum rpm or higher torque.
Two action modes are available: Drilling and Screwdriving
A single LED light with pre-glow and after-glow functions illuminate the work area.
The variable speed trigger allows for speed adjustments based on the material or application.
A convenient 13 mm (1/2″) keyless chuck for quick bit changes
The ergonomically designed grip ensures comfortable handling.
The reversing switch is conveniently located.
Water-resistance compatible with XPT
The hook allows for easy and convenient hanging of the tool.
The battery protection circuit protects against overloading, over-discharging and over-heating.
No load speed:
High: 0 – 1,900 minˉ¹
Low: 0 – 500 minˉ¹
Capacity:
Steel: 13 mm (1/2″)
Wood: 38 mm (1-1/2″)
Max torque:
65 N·m (580 in.lbs)
Max fastening torque:
Hard: 50 N·m (440 in.lbs.)
Soft: 27 N·m (240 in.lbs.)
Chuck capacity:
13 mm (1/2″)
Vibration level (EN62841-2-1):
Drilling into metal: 2.5 m/s² or less
Vibration K factor (EN62841-2-1):
Drilling into metal: 1.5 m/s²
Sound pressure level (EN62841-2-1):
78 dB(A)
Noise K factor (EN62841-2-1):
3 dB(A)
Dimensions (L x W x H):
167 x 81 x 237 mm (6-9/16 x 3-3/16 x 9-3/8″)
Malaysia
