Coriolis
Flowmeter with minimized total cost of ownership and an ultra-compact transmitter.
Accurate measurement of liquids and gases for a wide range of standard applications.
Cost effective – multi purpose device; an alternative to conventional volumetric flowmeters. Fewer process measuring points – multivariable measurement (flow, density, temperature). Space saving installation – no in-/outlet run needs.
Compact dual-tube sensor. Medium temperature up to +150 °C (+302 °F). Process pressure up to 100 bar (1450 psi).
Space saving transmitter – full functionality on the smallest footprint. Time saving local operation without additional software and hardware – integrated web server. Integrated verification – Heartbeat Technology.
Robust, ultra-compact transmitter housing. Highest degree of protection: IP69. Local display available.
DN 8 to 80 (!\ to 3")
Measuring tube: 1.4539 (904L)
Connection: 1.4404 (316/316L)
Mass flow, density, temperature, volume flow, corrected volume flow, reference density, concentration
Mass flow (liquid): ±0.15 % (standard), ±0.10 % (option)
Volume flow (liquid): ±0.15 %
Mass flow (gas): ±0.50 %
Density (liquid): ±0.0005 g/cm³
0 to 180 000 kg/h (0 to 6600 lb/min)
PN 100, Class 600, 63K
–40 to +150 °C (–40 to +302°F)
Standard: –40 to +60 °C (–40 to +140 °F)
Option: –50 to +60 °C (–58 to +140°F)
1.4301 (304), corrosion resistant
Compact: AlSi10Mg, coated
Compact/ultra compact: 1.4301 (304)
Standard: IP66/67, type 4X enclosure
Option: IP69
4 line backlit display available (no local operation)
Configuration via web browser and operating tools possible
4 20 mA HART (active)
Pulse/frequency/switch output (passive)
None
HART, Modbus RS485, EtherNet/IP, PROFIBUS DP, PROFINET
DC 20 to 30 V
ATEX, IECEx, cCSAus, INMETRO, NEPSI, EAC
CE, C-Tick, EAC marking
Calibration performed on accredited calibration facilities (acc. to ISO/IEC 17025)
Heartbeat Technology complies with the requirements for measurement traceability according to ISO 9001:2015 – Section 7.1.5.2 a (TÜV SÜD attestation)
LR approval, DNV approval, ABS approval, BV approval, CCS approval
PED, CRN
3.1 material
3-A, EHEDG, cGMP
