EMVI Series Pump
The EMVI Series pump can be used to convey various types of media, ranging from tap water to industrial liquids, at different temperatures, flow rates, and pressures. It is suitable for conveying non-corrosive liquids and slightly corrosive liquids.
Applications:
Water Supply:
Water filtration and transport in waterworks, boosting of main pipelines, and boosting in high-rise buildings.
Industrial Boosting:
Process flow water systems, cleaning systems, high-pressure washing systems, and firefighting systems.
Industrial Liquid Conveying:
Cooling and air-conditioning systems, boiler water supply and condensing systems, machine-associated purposes, acids, and alkalis.
Water Treatment:
Ultrafiltration systems, reverse osmosis systems, distillation systems, swimming pools, and separators.
Irrigation:
Farmland irrigation, spray irrigation, and drip irrigation.
Operating Conditions:
Suitable for thin, clean, non-flammable, and non-explosive liquids containing no solid granules or fibers.
Liquid Temperature:
Normal temperature type: -15°C to +70°C
Hot water type: +70°C to +120°C
Ambient Temperature:
Up to +40°C
Altitude:
Up to 1000 m
Pump:
The EMVI Series pump is a vertical, non-self-priming, multistage centrifugal pump driven by a standard electric motor. The motor output shaft is directly connected to the pump shaft through a coupling. The pressure-resistant cylinder and flow passage components are fixed between the pump head and the inlet and outlet sections with tie-bar bolts. The inlet and outlet are located at the bottom of the pump on the same plane. This pump can be equipped with an intelligent protector to effectively prevent dry-running, out-of-phase operation, and overload.
Electric Motor:
Fully enclosed, air-blast, two-pole standard motor
Protection class: IP55
Insulation class: F
Standard voltage, 50 Hz:
Single phase: 220-230/240 V
Three phase: 200-220/346-380 V, 220-240/380-415 V, 380-415 V
