Elec-component
SN74LS93N
SN74LS93N

 

SN74LS93N

Utsource Holding Company Limited flag
Kategori: Elec-component Tersedia (Kuantiti:9999999)
Untuk maklumat lanjut, lawati laman web rasmi kami di utsource.us
Lawati Laman Web Rasmi Hubungi kami
Penerangan

BUY SN74LS93N https://www.utsource.net/itm/p/958667.html
Sensitive Gate Silicon Controlled Rectifier; Package: TO-92 TO-226 5.33mm Body Height; No of Pins: 3; Container: Tape and Reel; Qty per Container: 2000

Parameter Symbol Conditions Min Typical Max Unit
Supply Voltage VCC Operating 4.75 - 5.25 V
Input Voltage (High Level) VIH Input 2.0 - 5.25 V
Input Voltage (Low Level) VIL Input 0.0 - 0.8 V
Output Voltage (High Level) VOH IO = -0.4 mA 2.4 - 5.0 V
Output Voltage (Low Level) VOL IO = 16 mA 0.0 - 0.5 V
Input Current (High Level) IIH VI = 5.0 V - 40 - μA
Input Current (Low Level) IIL VI = 0.0 V - 0.4 - mA
Output Current (Source) IOH VO = 2.4 V - 0.4 - mA
Output Current (Sink) IOL VO = 0.4 V - 16 - mA
Propagation Delay Time tpd VCC = 5 V, fIN = 10 MHz 18 - 36 ns
Power Dissipation PD Per Package - - 100 mW

Instructions for Use:

  1. Power Supply:

    • Ensure the supply voltage (VCC) is within the operating range of 4.75 V to 5.25 V.
    • Connect the ground (GND) pin to a stable 0 V reference.

  2. Input Signals:

    • Apply input signals (VIH and VIL) within the specified levels to avoid damage or incorrect operation.
    • Ensure that the input currents (IIH and IIL) do not exceed the maximum ratings.

  3. Output Signals:

    • The output voltages (VOH and VOL) should be within the specified ranges to ensure proper logic levels.
    • The output currents (IOH and IOL) must not exceed the maximum ratings to prevent damage to the device.

  4. Propagation Delay:

    • Consider the propagation delay time (tpd) when designing circuits to ensure timing requirements are met.

  5. Power Dissipation:

    • Monitor the power dissipation (PD) to ensure it does not exceed 100 mW per package to prevent overheating.

  6. Handling:

    • Handle the SN74LS93N with care to avoid static discharge, which can damage the device.
    • Store the device in a dry environment to prevent moisture damage.

  7. Testing:

    • Before integrating the SN74LS93N into a larger circuit, test it individually to ensure it functions correctly.

  8. Application:

    • The SN74LS93N is a 4-bit binary/decimal counter and can be used in various digital applications such as frequency division, counting, and timing circuits.
(For reference only)

Lebih maklumat tentang Utsource Holding Company Limited
Utsource Holding Company Limited
Utsource Holding Company Limited Electronic Component Wholesaler, IC Chip Distributor, IGBT Module Supplier in California, USA | Utsource Holding Company Limited
Hubungi kami flag