SPECIFICATIONS
| Type | Speed Controller Only |
|---|---|
| Controller Type |
Contact Speed Controller (With Acceleration/Deceleration Function) |
| Power Supply Input Voltage | Single-Phase 200 VAC±10% |
| Power Supply Input Frequency | 50/60 Hz |
| Speed Setting Methods |
Set 1 method from the following. · Setting using the internal speed potentiometer · Setting Using an External Speed Potentiometer (Included): PAVR-20 kY (20 kΩ, 1/4 W) |
| Function |
• Parameter: Gear Ratio, Speed Increasing Ratio, Lowest Digit Display Fixing, Prevention of Operation at Power-on Alarm, Speed upper and lower limit, Acceleration/Deceleration Time, External Operation Signal Input, Initializing Data • Monitor: Rotation Speed, Input Signal • Others: Lock Data Editing |
| Braking Current Duration | About 0.5 seconds |
| Braking Current (Peak Value) | It depends on the motor to be combined. |
