FE250MS | Mild Steel Floor Drying Oven with Analog Control
Holding temperature: 150ºC
Re-baking temperature: 300ºC-400ºC (for 2 to 4hrs)
External – EG Mild Steel casing with Epoxy
Internal – Fully Stainless Steel (Iron Free)
High quality and durable holding, re-baking, and reconditioning electrode oven with a mild steel casing to make a requirement for all certifications of calibration.
Removable Shelving for use with flux and wire coils
Even-Heat Distribution – rectangle shape distributes beat by convention
Heating Element – UL Approval File Note UL1030 (E107991)
Colour – safety yellow color ensure high visibility
Body –External Mild Steel EG
Body –Internal Stainless Steel
Drive off moisture and get good welds……
Guard against rejects……
Eliminate rework……
Protect welding profits….
A chimney effect that drives air upward along the center support bar, together with the oven’s rectangle shape and vented shelving, allows for exceptional heat flow patterns.
Specifications
|
Model |
FE250MS |
|
Capacity
Electrode Length |
250kg
457mm electrode |
|
Temperature
Average stabilized |
60ºC – 400ºC
Analog Control |
|
Input voltage |
240V AC |
|
Electrode size |
10”,12”,14”,18”
(254,305,356,457mm) |
|
Heating element |
2000watts (4) |
|
Insulation (rock fiber wool) |
2″ (50mm) |
|
Shelved compartment |
12 |
|
Inside diameter L x W x H (mm) |
480 x 310 x 680mm |
|
Outside diameter L x W x H (mm) |
580 x 420 x 933mm |
|
Nett weight |
75kg |
|
Shipping Weight & Dimension
L x W x H(mm) |
112kg
755 x 520 x 1033mm |
