Penerangan
Premixed thin cement-based finishing plaster for wall and ceiling in dry or wet interior and exterior area.
Substrate Preparation
- Remove dust, loose particles, grease and traces of foreign materials that may affect adhesion
- Dampen the dry absorbent surface before application of E.MIX Eco Base
Mixing & Installation
- Mix thoroughly with appropriate amount of water by using an electrical mixer.
- Allow mixture to stand for 10 minutes for additives to dissolve.
- stir again the mixture and ready to apply
- Apply with steel trowel or spatula
- When applying several layers, the layer underneath must be dried before spreading the subsequent layer.
- Finished surface can be sanded with fine sand-paper when necessary.
- Ceiling may be spray-textured finished
Lebih maklumat tentang Power Strength Specialist (PG) Sdn Bhd
