Lubricated Couplings Kota Kinabalu | Gear Coupling | Grid Coupling | power transmission Coupling | pumps gear boxes compressors blowers mixers conveyors

MH coupling consists of two flanges and flexible ring able to compensate all types of shaft misalignments.The flexible rings are made of synthetic rubber with steel cores reinforced for improve reliability and maximum operating speed of the coupling. The damping characteristic of the rubber enable to absorb and dampen torsional vibrations, operate effectively in temperature range of -40 to +100 °C. The rubber also resists to oil, dirt, grease, moisture, ozone and many chemical solvents.

Remarks:

1. Accommodate shaft misalignments, parallel offset 0.2 mm. and angular 0.3°.
2. Splined, hex, round, set screw or keyway bore available at additional charge.
3. Coupling hub material is made of cast iron.
4. Find Rated Torque by :
5. Rated Torque (Nm.) = (9.55 x P x S.F.) / N
6. Where P = Drive rated power (kW), N = Speed (rev./min)
7. Select coupling with the same or higher Torque.
8. Check hub bore capacity.
9. Check allowable speed.

Available Size:

MH 55, MH 65, MH 80, MH 90, MH 115, MH 130, MH 145, MH 175, MH 200