WEBERSET EASY FLEX - C2TE

Specifications

SKU: EASY FLEX

Weight(grams): 25000

Dimension: 20 cm (Length) x 20 cm (Width) x 32 cm (Height)

• Substrate must be dry, sound, flat / true & free of contaminants.
• Ceramic Tiles are to be fix dry. Do not soak in water.
• Mix weberset easy flex with water (or Latex Admixture) as per the recommended mix ratio. Mechanical mixing recommended.
• Spread adhesive to the substrate at bed thickness of 3 - 6mm (may vary depending on tile size & thickness) with suitable notched trowel.
• Spread no more than 1 m2 at a time to avoid Skin-Over. 
• Promptly fix tiles onto adhesive bed, followed by slight twisting action to ensure good contact ie. Solid Bed Fixing.
• Touch adhesive bed periodically to check for Skin-Over. Where adhesive bed is no longer tacky / sticky, Skin-Over had occurred. Re-Trowel adhesive bed.
• Allocate joints of approx. 3mm wide between tiles.
• Remove surplus adhesive from tile surface & joints before it hardens.
• Set for 24 hours; before grouting commences.